User's Manual
Table Of Contents
- 1 About this manual
- 2 Grouped safety messages
- 3 Product description
- 4 Design and Function
- 5 Installation
- 6 Start-up
- 6.1.1 Service switch
- 6.1.2 Cold start
- 6.1.3 Starting the service mode
- 6.1.4 Starting the service mode and setting the service IP address
- 6.1.5 Starting the terminal software / warm start
- 6.2.1 Communication
- 6.2.2 Comparing finger templates
- 6.2.3 1-click installation
- 6.2.4 Configuration
- 6.3.1 Start-up procedure
- 6.5.1 Ethernet settings
- 6.5.2 Host interface
- 6.5.3 Reader settings
- 6.1.1 Service switch
- 7 Operation
- 8 Maintenance
- 9 Packaging / returns
- 10 Disposal
- 11 Index
Manual Product description
B-eco 04043988 - 02/2014 13
3.2 Technical data
3.2.1 System
Kaba BECO330 CPU unit with ARM7TDMI processor core
Memory
• 8 MByte Flash
• 16 MByte SDRAM.
• 2 MByte SRAM, buffered
Modified parameters, master records, and data records are retained approximately 6
months without power supply.
Graphic monochrome display
• 240 x 128 pixels resolution.
• Background illumination by white LED.
Capacitive keypad
SFDC version:
• 5 function keys (F1 to F5).
• 4 special keys (grey).
• Numeric keypad with C and E keys.
XML version:
• 5 function keys (F1 to F5).
• 8 special keys (gray).
• Alphanumeric keypad (multiple assignment) with C and E keys.
3.2.2 Inputs / Outputs
1 relay output (optional)
• One potential-free changeover contact.
• Contact rating: 30 V AC / DC; max. 2 A
Only voltages from limited power sources according to EN 60950-1 may be
applied.
2 digital inputs (optional)
• Controllable against GND via dry contact.
• Controllable via external direct voltage, switching level:
− Active input: 0 V to 0.8 V
− Inactive input: 2.5 V to 24 V