User's Manual
Table Of Contents
- 1 About this manual
- 2 Grouped safety messages
- 3 Product description
- 4 Design and Function
- 5 Installation
- 6 Start-up
- 6.1.1 Service switch
- 6.1.2 Cold start
- 6.1.3 Starting the service mode
- 6.1.4 Starting the service mode and setting the service IP address
- 6.1.5 Starting the terminal software / warm start
- 6.2.1 Communication
- 6.2.2 Comparing finger templates
- 6.2.3 1-click installation
- 6.2.4 Configuration
- 6.3.1 Start-up procedure
- 6.5.1 Ethernet settings
- 6.5.2 Host interface
- 6.5.3 Reader settings
- 6.1.1 Service switch
- 7 Operation
- 8 Maintenance
- 9 Packaging / returns
- 10 Disposal
- 11 Index
Manual Design and Function
B-eco 04043988 - 02/2014 31
4.4.3 License file
The sop.ini file is stored in the /Program/Share/Init/ directory.
This file contains the license key for the basic software and software options
purchased by the customer. The license key is bound to the MAC address of the
device.
The contents of the sop.ini file may not be modified. Any manual change will
invalidate the license.
The parameters allow you to see which functions are enabled.
Entry (example) Meaning
[BClientPDC6]
Section of B-Client PDC6 terminal software
BufferConfiguration=2
Memory options 0 to 3
The following parameters each have the
value true or false.
BClientPDC6Enabled=true
B-Client PDC6 terminal software
ERPClientEnabled=true
true = useable with B-COMM ERP
false = not useable with B-COMM ERP
DigitalIOEnabled=true
true = Inputs / Outputs available
false = Inputs / Outputs not available
EncryptionEnabled=true
true = Encryption available
false = Encryption not available