User's Manual

Manual Operation
B-eco 04043988 - 02/2014 59
At the end of the enrollment process, an overview with the following contents is
displayed.
• Total quality of the enrolled fingers by means of text and figures.
• Belonging ID.
Example:
Enrolled ID: 00000126
Template 1: 103 / Template 2: 96
Template quality: good
OK Cancel Retry
The quality of the enrolled fingers is subdivided into three levels.
• > 120 Very good quality
• 60-120 Good quality
• < 60 Poor quality
If the quality is poor, then the enrollment process should be repeated.
Wait for the new template to be collected by B-COMM (not in standalone mode). The
message "Sending template to FTCS..." is displayed. The process will be continued as
soon as B-COMM has collected the template (normally after 1-2 seconds).
If B-COMM is not available, the message "Timeout in connection to FTCS!" is
displayed after 10 seconds and an acoustic signal is emitted. In this case, the
generated template is not stored in the local database.
7.7.2.2 Unenroll
A specific template can be deleted from the database via its template ID using the
Unenroll function (only in standalone operation).
The input ID is deleted by pressing "OK" or the E button. This is confirmed by an
acoustic signal. In case of error, an acoustic signal is emitted and the message
"<Template ID> does not exist!" or "Deleting template failed!" is displayed. Return to
the menu in both cases or by pressing “Cancel”.
7.7.2.3 List
This function lists all template IDs stored in the data base. The list can be scrolled
using the arrow keys of the display keypad or the accordingly marked function keys
(depending on terminal).
Press the C button to cancel the function and return to the menu.