User's Manual

Table Of Contents
Manual B-Net® 91 04 Mounting and Installation
12/2008 © Kaba GmbH 25
5.10 Final assembly
Fasten the front foils for finishing installation.
NOTICE!
Before fixing the front foils, the device must be put into service, see chapter
6.
Fig. 11: Fixing the front foils
NOTICE!
Observe the following to avoid leaks:
Use only new front foils with undamaged peel-off foil.
The housing surfaces on which the foil is to be fixed must be dry, fat-free and
clean. For cleaning purposes use solvents free of any oily or greasy
substances such as n-Heptan or isopropyl alcohol.
Press the foil down to fix it.
The ambient temperature must be minimum +4°C.
The ambient temperature must be at least + 4°C. If the minimum processing
temperature is not of + 4°C, or if you expect the temperature to drop below
this value within the next 3 hours after bonding, do not mount the
subterminal.