User's Manual
Table Of Contents
- 1 About this Manual
- 2 Safety Regulations
- 3 Product Description
- 4 Design and Function
- 5 Mounting and Installation
- 6 Start-Up
- 7 System mode
- 8 Description of the Subpartyline
- 9 Packaging / Returns
- 10 Disposal
- 11 Index
Start-Up Manual B-Net® 91 04
26 © Kaba GmbH 12/2008
6 Start-Up
NOTICE!
The descriptions in chapter Set-up refer to devices with standard configuration
preset in the factory.
By default, the driver "LEGIC® prime read-only" is active. This driver is compatible
to the Bedas/Bedanet series, i.e. media with previous data structure can be read.
The stand-alone mode is only possible with standard configuration.
Other drivers can be configured in system mode, see chapter
7. These include
"LEGIC® prime read and write" or "LEGIC® advant read and write".
In this case, make sure that the access control unit supports these drivers in the
online mode.
Remark
As a standard, only those badges are accepted which have a segment containing
SSC 02 and a fixed structure of the badge data according to Kaba group header.
Non-segmented badges may have an arbitrary SSC, but must also be coded
according to Kaba group header.
It is also possible to allow badges having a different SSC and a different data field
structure if defined so in the "Customer Number List".
The customer number list can be set by the control (see chapter
8.7.8) or a service
PC with parameter setting tool (see chapter
6.1).