User's Manual
Table Of Contents
- 1 About this Manual
- 2 Safety Regulations
- 3 Product Description
- 4 Design and Function
- 5 Mounting and Installation
- 6 Start-Up
- 7 System mode
- 8 Description of the Subpartyline
- 9 Packaging / Returns
- 10 Disposal
- 11 Index
System mode Manual B-Net® 91 04
34 © Kaba GmbH 12/2008
7.1.1.1 Description of the Parameters
Protocol Type:
2-digit protocol to control unit (data interface)
00 no protocol
01 BPA/9 protocol
02 BPA/9 protocol with activatable header
Keyboard type:
2 digits: Keyboard type
00 No keyboard
Driver type for AUX channels:
2-digit type for AUX 1
00 no component
16 Serial driver for LEGIC prime - read-only
(data such as LEGIC MAG reader without protocol)
- serial interface
- CIR: Information from LEGIC SM100-S
- Interface parameter: 9600 baud, 8 data bits, no parity, 1 stop bit
18 Serial driver for LEGIC advant - read-only
(data such as LEGIC MAG reader without protocol)
- serial interface
- CIR: Information from LEGIC advant SM
- Interface parameter: 9600 baud, 8 data bits, no parity, 1 stop bit
32 Serial driver for LEGIC prime - read and write
(protocol corresponding to ISO 7816-4)
- serial interface
- CIR: Information from SM100-S
- Interface parameter: 9600 baud, 8 data bits, no parity, 1 stop bit
34 Serial driver for LEGIC advent - read and write
(protocol corresponding to ISO 7816-4)
- serial interface
- CIR: Information from LEGIC advant SM
- Interface parameter: 9600 baud, 8 data bits, no parity, 1 stop bit
If the serial interface is used for a driver, specify the interface parameters also. For
some drivers, the above-mentioned parameters must be firmly defined, for
transparent drivers, the following parameters are possible:
Baud rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 baud
Data bits: 7, 8
Parity: 0 (no), 1 (odd), 2 (even)
Stop bits: 1, 2