User's Manual

Table Of Contents
Manual B-Net® 91 04 Description of the Subpartyline
12/2008 © Kaba GmbH 47
8.7.3 Device configuration
The device configuration of the subterminal is requested by means of the following
ESC sequence. The subterminal sends the ESC sequence “Device configuration”
in response.
Meaning Code
Requesting equipment
configuration
<ESC>[c
Response from the subterminal
<ESC>[:2;Ps;Ps;..c
The number of configuration entries may vary depending on the device
configuration. The individual configuration entries are separated from each other by
“;” (semicolon).
Example:
<ESC>[:2;3;?10;?1000;?1116c
Ps:
State:
0 = Keypad present
3 = No keyboard available
?10 = Channel AUX 1 present
?13 = Channel AUX 1 not available
Type:
?1000 No keyboard available
?1100 Channel AUX 1 not available
?11xx Component type xx at AUX 1 channel
8.7.4 Program number
The program number (version of the terminal software) is requested by means of
the following ESC sequence. The subterminal will send the ESC sequence “Report
program number” in response.
Meaning Code
Request program number
<ESC> [ ? c
Response from the
subterminal
<ESC>[?18 O<ESC>P844-00-X-K00<ESC>\
1 2
1) Space = 20
Hex
2) O as in Otto = 4F
Hex