User's Manual

Table Of Contents
Description of the Subpartyline Manual B-Net® 91 04
48 © Kaba GmbH 12/2008
8.7.5 Recorded data
After entering a badge, the subterminal will send the following sequence.
Meaning Code
Badge data
<ESC>[?11 O<ESC>PDATA<ESC>\
1 2
1) Space = 20
Hex
2) O as in Otto = 4F
Hex
DATA:
Badge data
After pressing a key, the subterminal will send the following sequence.
Meaning Code
Key (displayable character)
20
Hex
..7E
Hex
"E" key (Enter)
<CR>
"C" key (Clear)
<ESC> [ 2N
8.7.6 Hex Representation of the Recorded Data
The Hex representation of the collected data are set by means of the following
ESC sequences.
Meaning Code
Hex representation with letters
<ESC>[?14i
Hex representation with special characters
<ESC>[?15i
Example:
Hex representation with letters:
0123456789ABCDEF
Hex representation with special characters:*
0123456789:;<=>?
*Default
8.7.7 Acoustic acknowledgement for reading
As the search through the customer number list can take up to approximately 1
second, the correct reading of a badge can be acknowledged with a short acoustic
signal.
This acoustic acknowledgement can be switched on/off with the following ESC
sequence:
Meaning Code
Acoustic acknowledgement on
<ESC>[?16i
Acoustic acknowledgement off *
<ESC>[?17i
* Default