User's Manual
Table Of Contents
- Contents
- 1 About this Document
- 2 Grouped safety messages
- 3 Product Description
- 4 Design and function
- 5 Installation
- 5.1 Installation conditions
- 5.2 Installation layout (example)
- 5.3 Installation lines
- 5.4 Mounting the device and extension modules
- 5.5 Connections
- 5.6 Configuration
- 6 Start-up
- 7 Maintenance
- 8 Troubleshooting
- 9 Packaging/Return
- 10 Disposal
- Index
Technical Manual Product Description
15- 06/2016Kaba Remote Reader 91 15-AM (US/
CAN)
3.3 Operating modes
The door configuration determines the operating mode of the device. A detailed de-
scription of the door configurations and their operating modes can be found in the
chapter 'Electric strike' operating mode [}4.9].
3.4 Supported RFID Standards with Possible Media Definitions
The following table shows the RFID standards and media definitions supported by
the device.
The Kaba Remote Reader 91 15 recognizes up to eight different media definitions at
the same time.
Media definitions Supported RFID technologies
MIFARE
DESFire
MI-
FAREClas-
sic
LEGICadvant LEGICpri
me
ISO
14443A
ISO
14443A
ISO
14443A
ISO
15693
LEGICRF
Unique number (UID)
*1
✔ ✔ ✔ ✔ -
Safe UID - - - - ✔
Card ID ✔ ✔ ✔ ✔ -
Kaba group header - - ✔ ✔ ✔
Kaba advant ID - - ✔ ✔ -
LEGIC access™
(advant)
- - ✔ ✔ -
LEGIC access™ pool
(prime)
- - - - ✔
CardLink
1.1
Data ✔ ✔ ✔ ✔ -
Actuator
status
✔ ✔ ✔ ✔ -
Media
traceback
*2
✔ - ✔ - -
CardLink1
.0
Data incl.
actuator
status
- - - - ✔
Additional media
numbers
✔ ✔ ✔ ✔ ✔
*1 The LEGIC chip set does not use the safe UID command set
so that UID from other media, such as MIFARE, can also be
read.
*2 Media traceback information can only be read out directly
on the access manager and no media traceback informa-
tion is written.
3.4.1 MIFARE
The system can evaluate everything that can be defined in Kaba media manager. MI-
FARE DESFire or MIFARE Classic media can be read and described on the same Kaba
Remote Reader 91 15 MIFARE using various media applications.