User's Manual
Table Of Contents
- Contents
- 1 About this Document
- 2 Grouped safety messages
- 3 Product Description
- 4 Design and function
- 5 Installation
- 5.1 Installation conditions
- 5.2 Installation layout (example)
- 5.3 Installation lines
- 5.4 Mounting the device and extension modules
- 5.5 Connections
- 5.6 Configuration
- 6 Start-up
- 7 Maintenance
- 8 Troubleshooting
- 9 Packaging/Return
- 10 Disposal
- Index
Design and function Technical Manual
24 - 06/2016 Kaba Remote Reader 91 15-AM (US/
CAN)
4.3 Firmware
The hardware of this product is used in various Kaba system solutions. The functions
and possible uses of the product are determined by the firmware used.
This manual exclusively describes the Kaba Remote Reader 91 15 with functional
type Access Manager (AM).
Firmware designation
Reader type
M
MIFARE
A
LEGIC
B
MRD (multi RFID device)
LEGIC or MIFARE
(determined during commissioning)
Device type
RC
Compactreader
RR
Remotereader 91 15
RE
Remotereader 91 25
Functional type
A
E300 V4 or N300/T300/U300 V3
B
Access Manager
C
Subterminal
E
AMC/II (cDML)
Version number
xx.xx
Version
Addition 1
R
Final, approved version
Addition 2
A
Subversion
Addition 3
_
Reserve
Example
Designation of firmware for Kaba Remote Reader 91 15 with functional type Access
Manager:
• BREB03.xxRxx (MRD)
Firmware mark on the product
Devices with firmware with the functional type access manager bear a mark reading
"Type: Access manager" on the identification plate.