User's Manual
Table Of Contents
- Contents
- 1 About this Document
- 2 Grouped safety messages
- 3 Product Description
- 4 Design and function
- 5 Installation
- 5.1 Installation conditions
- 5.2 Installation layout (example)
- 5.3 Installation lines
- 5.4 Mounting the device and extension modules
- 5.5 Connections
- 5.6 Configuration
- 6 Start-up
- 7 Maintenance
- 8 Troubleshooting
- 9 Packaging/Return
- 10 Disposal
- Index
Installation Technical Manual
46 - 06/2016 Kaba Remote Reader 91 15-AM (US/
CAN)
5.5.3 Output
The function of the inputs and outputs depends on the control unit used and its pa-
rameter settings.
Output (OUT), e.g. for an electric strike:
COM
NC
1
NO
2
1 Kaba Remote Reader 91 15
2 Free-wheeling diode for door openers with DC voltage
or
varistor for door openers with AC voltage.
Item* Meaning
6 NC (normally closed)
6 COM
6 NO (normally open)
*See
Contact load capacity: See Outputs
Also see about this
2 5.5.1Connections [}43]
5.5.3.1 Note on the use of door openers
The relay can be used to activate the door opener. For door openers that are sup-
plied with DC voltage, a "free-wheeling" diode must be parallel-connected (in the re-
verse direction) to the door opener for noise attenuation. A varistor must be con-
nected parallel to AC voltage door openers.