User's Manual
Table Of Contents
- Contents
- 1 About this Document
- 2 Grouped safety messages
- 3 Product Description
- 4 Design and function
- 5 Installation
- 5.1 Installation conditions
- 5.2 Installation layout (example)
- 5.3 Installation lines
- 5.4 Mounting the device and extension modules
- 5.5 Connections
- 5.6 Configuration
- 6 Start-up
- 7 Maintenance
- 8 Troubleshooting
- 9 Packaging/Return
- 10 Disposal
- Index
Technical Manual Troubleshooting
65- 06/2016Kaba Remote Reader 91 15-AM (US/
CAN)
Error Possible cause Measures
Time sequence of
the access point
control is incorrect
Configuration of the access
point in the host system
changed
Adjust DIP switch settings
Memory of the remote reader
deleted via factory reset and
the data of the host system
has not yet been written to
the remote reader
Adjust times in the host sys-
tem and transfer to the re-
mote reader
Check whether the data has
been loaded from the control
device onto the remote reader
after a factory reset
Check whether the desired
times have been defined in
the host system
Cabling changed Adjust cabling
Remotereader
does not write on
the media
Remotereader has no write
authorization
Grant write authorization
CardLink settings in the host
control device are incorrect
Adjust the configuration of the
host control device