User's Manual
Table Of Contents
- Table of Contents
- 1 About this document
- 2 Basic safety information
- 3 Product description
- 4 Construction and function
- 4.1 Device structure
- 4.2 Product versions
- 4.3 Terminal software
- 4.4 System connection
- 4.5 Authentication types
- 4.6 CardLink
- 5 Installation
- 6 Commissioning
- 7 Operation
- 8 Maintenance
- 9 Packaging/Returns
- 10 Disposal
- Index
Operation Technical Manual
76 04043552 - 07/2017Terminal 97 00
7.5 RFID reader
Contact-free media are simply held in front of the entry field of the RFID reader on the ter-
minal.
The reading process, in particular in connection with biometric verification or CardLink, can
take several seconds. RFIDDo not remove the RFID medium from the input field until success-
ful read-in has been signalled.
7.6 Biometric reader
The biometric reader is ready as soon as the reading window is lit.
The finger must be placed in the centre of the reading window of the biometric reader.
After a valid booking, a short acoustic signal can be heard.
Finger position
Only if finger position and pressure on the reader window are optimal, is a correct fingerprint
read-in ensured.
• The finger has to be slightly humid.
• The finger has to be gently pressed onto the window.
• The fingerprint has to be in the centre of the reader window.