User's Manual
Table Of Contents
- Table of Contents
- 1 About this document
- 2 Basic safety information
- 3 Product description
- 4 Construction and function
- 4.1 Device structure
- 4.2 Product versions
- 4.3 Terminal software
- 4.4 System connection
- 4.5 Authentication types
- 4.6 CardLink
- 5 Installation
- 6 Commissioning
- 7 Operation
- 8 Maintenance
- 9 Packaging/Returns
- 10 Disposal
- Index
MaintenanceTechnical Manual
9504043552 - 07/2017 Terminal 97 00
8.4 Installation/Update of the terminal software
For the installation or update of the terminal software on the terminal, an installation tool is
available. This so-called SFTP installer can be downloaded for the particular terminal soft-
ware in the secured area of the dormakaba website (Extranet).
Installation
For initial installation or in order to replace a faulty installation, a complete installation of the
terminal software is required.
The installation process will reset any settings already made.
Update
An update is performed in order to update the already existing terminal software to a new
version.
During an update process, only the program files will be replaced. Existing settings are re-
tained.
8.4.1 Data backup
Before an update or a new installation of the terminal software is made, the following data
must be backed up.
• Device configuration and parametrization
• If specific layout adjustments are made, the 'interface.ini’ file and pictures must be
backed up on a local drive.
8.4.2 Preparing installation/update
ü Authorization for access to dormakaba Extranet [}1.5].
1. Download SFTP installer from dormakaba Extranet.
2. Unzip ZIP file to a local directory.
3. If the SSH key for SFTP access was changed:
Copy relevant key file (*.ppk) to the directory of the SFTP installer.
In the 'Standard_Software.ini' file, enter the file name of the key file under 'Key_Path='.
Format Key_Path='<File name>.ppk'
4. Start the installation tool by double-clicking 'SFTP Installer.exe'.
ð The first prompt of the user guidance is displayed.
8.4.3 Performing an update
1. Select the device type.
2. Select 'Update’.
3. Select terminal software (B-Client HR30)
4. Select add-ons (BaseApp + test program)
5. Enter IP address and SFTP access data.
ð A summary of the installation data is displayed.
6. Start process.
ð The process can take several minutes. Successful execution is confirmed by the install-
ation tool.
7. Restart the device.
ð The terminal software is now up-to-date.