User's Manual

Configuration Manual
5.1.2.4 Network parameters
To open the Network configuration page click on Network in the Configuration
menu in the left frame. The settings page appears.
Hostname
The host name of the terminal.
Domain
The name of the network domain to which the terminal belongs to.
TCP/IP address
The TCP/IP address of the terminal.
TCP/IP subnet mask
The TCP/IP subnet mask of the terminal (default is 255.255.255.0).
TCP/IP default Gateway
The TCP/IP address of the default gateway. With the value set to NO, the default
route to eth0 is used.
TCP/IP address of the name server
The TCP/IP address of the name server, if used.
Activate DHCP request
Allow or disallow the use of a DHCP Server for IP configuration. If this parameter is set
to Yes, the five parameters above are read-only.
32 04044239 - 08/2013 TT1100