User's Manual

Manual Configuration
The PIN for startup configuration
The PIN to be entered at terminal startup to change the IP configuration for the
terminal, default 1234. Leave blank to disable the start-up dialog.
Activate Network Interface
The network interface to be used, currently RJ45 only.
Mac Address
Read-only field showing the MAC address.
Proxy Server
The IP address or name of the Proxy Server.
Proxy Port
The port number of the Proxy Server.
Socks Proxy Server
(For Webservice) The IP address or name of the Socks Proxy Server.
Socks Proxy Port
(For Webservice) The port number of the Socks Proxy Server.
Network config
By selecting Activate, the network configuration of the operating system is
activated. This is required after changing a network parameter.
Enable System FTP Server
By default no FTP Server is running on the terminal. If it is necessary for a host system
to connect to the terminal via FTP, set this parameter to YES.
TT1100 04044239 - 08/2013 33