User's Manual

Configuration Manual
5.1.2.7 Communications parameters
To open the Communications configuration pages click on Communications in the
Configuration menu in the left frame. With the Communications parameters you
configure your host connection.
Upload
The Upload parameter page is the only page in the Communications parameter
group. It describes the communication from the terminal to the host.
Connection type
The protocol to be used for sending messages to the host. Choices are TCP-Client,
TCP-Server, Web Service, and FTP. (A TCP-Server is waiting for a connection
request and a TCP-Client is trying to open the connection.) Default TCP-Client.
TCP/IP address
The TCP/IP address used for the host data connection.
TCP/IP port
The TCP/IP port used for the host data connection, default 1089.
48 04044239 - 08/2013 TT1100