User's Manual

Configuration Manual
Manual Update To open the Manual Update page click on Manual Update in the menu bar in the
upper part of the right frame.
Click on Add and browse on your local or remote disk drive for the desired ipk file.
After you selected a file, the package will be examined, e. g. if it contains an older
version than already installed. If the package is OK, it is display in the following list:
You can now delete the previously selected package, add further packages or click
on Install. If you confirm the message “Press OK to start the Software Update. The
Terminal will restart after Installation”, the terminal will restart and install the
package(s) during startup.
There is an alternative for updating software: you can use an USB stick with the
appropriate ipk file(s). Please refer to chapter
5.3.
58 04044239 - 08/2013 TT1100