User's Manual

Operation Manual
6 Operation
6.1 Fingerprint operation
In order to use a terminal with biometric reader for collecting bookings, templates
(fingerprints) for all users have to be enrolled (registered) first.
By default these templates are stored inside the biometric reader module. If the
internal database of the reader module is still empty and the user wants to perform a
booking, the reader will not be activated, but an error message will be displayed
„Sagem database empty“.
6.1.1 Enrollment
The exact enrollment procedure is defined in the application.xml configuration file.
In any case two fingers have to be scanned three times each, and the best template
for each finger is stored. Also it is required to enter an enrollment ID for storing the
templates which is later used like a badge number for a booking record.
Typically the enrollment dialog must be released first by an administrator, who has to
enter the appropriate PIN. The administrator key
leads to this PIN protected
dialog.
Sequence:
After pressing the administrator key a PIN prompt is displayed. The PIN corresponds
to the PIN used for the startup dialog, by default 1234. After successful login the main
menu is displayed, similar to the following:
Please select option:
1 Enroll person
2 Delete person
3 Delete All
Option 1 is used to enroll new users, option 2 to delete the templates of one user
according to an ID, and option 3 is used to delete the whole database of the Sagem
module, i. e. all enrolled templates.
64 04044239 - 08/2013 TT1100