Operating Instructions

ManualsBrandsdormakaba USA ManualsElectronicsWireless lock FOB

OVERVIEW

INSTALL MOBILE APP/

To download the Switch™ mobile app, open the App Store or the Play Store. Browse for the Switch™ mobile app

and then select and tap the app to install.

Launch and register with your phone number.

NOTE: If step 1 has been

completed, proceed to step 2.

+1 XXX-XXX-XXXX

Synchronize With Mobile Device

Front

Cover

Battery

(CR2032)

Back

Cover

Switch™ Fob

Operating Instructions

Compatible

Devices:

Android™ 5+

iOS: 11.0+

Summary of content (5 pages)

PAGE 1
Switch™ Fob Operating Instructions OV E RV I E W Compatible Devices: Android™ 5+ A Front Cover B Battery (CR2032) C Back Cover iOS: 11.0+ A B C Syn c h ro n i z e W i t h M o b i l e D ev i c e 1 INSTALL MOBILE APP/ REGISTER PHONE NUMBER +1 XXX-XXX-XXXX NOTE: If step 1 has been completed, proceed to step 2. To download the Switch™ mobile app, open the App Store or the Play Store. Browse for the Switch™ mobile app and then select and tap the app to install.
PAGE 2
Syn c h ro n i z e W i t h M o b i l e D ev i c e 2 TAP FOB ICON TAP SYNC BUTTON Sync Sync Fob LED Fob Tap the Fob icon. 3 Tap the Sync button. INITIATE PAIRING OF FOB AND MOBILE DEVICE Press and hold the fob button for THREE seconds. PAIRING NOTE: When pairing a fob with a mobile device, take care that there are no Switch devices nearby, otherwise the fob may accidentally connect to the wrong device. Press and hold the fob button for THREE seconds.
PAGE 3
H ow To U s e T h e Fo b 1 TOUCH DEVICE THEN PRESS FOB BUTTON TO REQUEST ACCESS Touch the device (Switch™ Core or Reader). One or more LEDs will indicate the device is awake and ready to interact with a fob. 2 Press the fob button once. Fob LED Status: • Green: Battery OK • Red: Critical battery, Fob may be unregistered. • Yellow: Low battery • LED Turns Off: The LED will light once for ONE second and then turn off.
PAGE 4
FC C / I C C e r t i fi cat i o n Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Statement This equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to Part 15 of the FCC Rules.
PAGE 5
WA R N I N G WARNING: This manufacturer advises that no lock can provide complete security by itself. This lock may be defeated by forcible or technical means, or evaded by entry elsewhere on the property. No lock can substitute for caution, awareness of your environment, and common sense. Builder’s hardware is available in multiple performance grades to suit the application. In order to enhance security and reduce risk, you should consult a qualified locksmith or other security professional.