User's Guide

dormakaba USA Inc. System User Guide 7040.0320 | 35
Follow these steps to open a safe lock during a Time Delay on a non-Display Keypad:
1. Using the Keypad, input the User ID and then the Combination.
2. The Keypad will beep and flash a red LED once every 10 seconds during the Time Delay period.
3. The Keypad will then beep and flash a green LED once every 10 seconds during the Confirmation Window, signifying the safe
lock can now be opened.
4. Input the User ID and Combination.
5. The lock will open. After a few seconds, the lock will close.
3.11.3 Cancel a Time Delay
3.11.3.1 Cancel a Time Delay – Display Keypad
Follow these steps to cancel a Time Delay on a Display Keypad:
1. While a safe lock is currently in a Time Delay, press the Return Key on the Keypad.
2. Input a valid User ID and Combination.
3. From the sub-menu, select Cancel TD.
a) For multi-lock systems, select the corresponding lock number on the keypad
4. Lock Dly Cancelled will appear on screen and the Keypad will beep three times and flash a green LED.
3.11.3.2 Cancel a Time Delay – Non-Display Keypad
Note: This function is not available on the 701 series of Keypad,
Follow these steps to cancel a Time Delay on a non-Display Keypad:
1. While a safe lock is currently in a Time Delay, using the Keypad, input #74 + Authorized User ID and Combination + Return Key.
2. The Keypad will beep three times and flash a green LED once complete.
3.11.4 Time Delay Override
For a user to execute a Time Delay Override, the lock itself must allow it. The Time Delay Period and Confirmation Window period
must be set.
There are two ways to perform a Time Delay Override:
1. The user must possess Time Delay Override w/ Combo privilege.
2. The user must possess Time Delay Override w/ fob privilege.
Refer to sections 3.8.2 Add User or 3.8.3 Edit User for information on how to give users Time Delay Override privileges.
3.11.4.1 Allow Time Delay Override – Display Keypad
Follow these steps to Allow Time Delay Override to a safe lock on a Display Keypad:
1. Navigate through the Main Menu and select System.
2. Select Locks from the sub-menu.
3. Select TimeDelay from the Locks menu.
4. Select ChangeOveride.
a. For multi-lock systems, select the corresponding lock number on the keypad
5. Allow Ovride? appears on screen. Choose between Yes or No.
6. Success OvrRde update appears on screen and the Keypad will beep three times and flash a green LED once complete.