User's Guide

dormakaba USA Inc. System User Guide 7040.0320 | 6
1. Enter the ID and Combination to access the menu.
2. Navigate through the Main Menu and select System.
3. Select FCC Label from the sub-menu.
4. Navigate through the FCC & IC information on screen with the arrow buttons.
1.2 Electrical Precautions
Ensure alkaline batteries (where applicable) are new and in good condition; leaking batteries can cause damage to components and
can also cause serious bodily harm. Do not apply power (where applicable) before completing all steps of the installation; doing so
may damage the components. Ensure all power supplies are plugged into grounded electrical receptacles that comply with local
building code(s). When AC mains power is required the power supply shall be installed in accordance with NFPA 70 and any
applicable electrical codes.
1.3 Tools
dormakaba USA Inc. recommends having the following tools on hand to install LA GARD safe locks and their components:
• Digital voltmeter
• Wire cutters and needle nose pliers
• Set of screwdrivers
• Drill and drill bits
• Automatic saw (band saw, hand saw)
• US or Metric taps
• File or equivalent tool
• All installation/hardware documentation for quick reference
2 Typical System Layout (Single & Multi)
The following sub-sections review safe lock system components with related diagrams. Refer to each product’s individual
documentation for more detailed information on hardware installation and proper device usage.
The following diagrams (Figures 1 and 2) show completed system layouts for both single and multi-lock systems. Please note that
your system may not include all components shown.
Figure 1 – Single Lock System