User's Guide

dormakaba USA Inc. System User Guide 7040.0320 | 17
3.4 Reinstall Keypad
A new Keypad can be installed into the system if the current one is defective or needs to be replaced. If the new Keypad is a non-
Display screen variant, a command sequence would need to be followed with an authorized user. If the Keypad has a display screen,
prompts will appear to guide the user through the process. An Audit will be generated to indicate which user installed the new
Keypad. Once paired, the system returns to regular operation. Refer to the Keypad Installation Guide (Document #7033.0320) for
more information.
Note: The system will only recognize the same Keypad model as before, otherwise it will reject the reinstall process. If installing a
new model of Keypad, all locks attached to the system must be reset/uninstalled and reinstalled prior to installing the new Keypad.
3.5 Change Combination
3.5.1 Change Combination – Display Keypad
Follow these steps to change a User combination on a Display Keypad:
1. From the Keypad display Main Menu, select Change combo.
2. New Combo appears on screen. Input a new combination with the number pad.
Note: The new Combination must be different from the old Combination. The User is advised to use a non-trivial combination.
3. Confirm appears on screen. Input the same combination from the previous step to confirm. Success will appear on screen. The
new combination is set and will be in affect the next time the User enters their combination. The Keypad will beep three times
with a green LED and return to the Enter ID menu once complete.
3.5.2 Change Combination – Non-Display Keypad
Follow these steps to change a User Combination on a non-Display Keypad:
1. If a Master/Manager User is changing another User’s combination, do the following:
a. Using the Keypad, input #57 + Authorized User ID and Combination + User ID and new Combination + User ID and
new Combination again + Return Key.
b. The Keypad will beep three times and flash a green LED
2. If a User is changing their own combination, do the following:
a. Using the Keypad, input #52 + User ID and Combination + User ID and new Combination + User ID and new
Combination again + Return Key.
b. The Keypad will beep three times and flash a green LED once complete