User's Guide

dormakaba USA Inc. System User Guide 7040.0320 | 18
3.6 Change Time/Date/DST
3.6.1 Change Time/Date/DST – Display Keypad
Follow these steps to change the Time/Date/DST on a Display Keypad:
1. Navigate through the Main Menu and select Time/Date.
2. Select one of the follow sub-menu options:
a. Time Format – Choose between 24Hr and 12Hr
b. Date Format – Choose between yy_mm_dd, mm_dd_yy, and dd_mm_yy
c. Set Time Date – Input the time and date with the number pad
d. Observe DST – Select either Enable or Disable
3. The Keypad will beep three times and flash a green LED once complete.
To effectively use the DST settings, the DST tables must be sent down from the PC software when setting time via the PC. If the
Time/Date is not set after a prolonged power outage, access time lock schedules cannot be enforced and may result in the inability
to open the lock until the Time/Date is set.
3.6.2 Change Time/Date/DST – Non-Display Keypad
Follow these steps to change the Time/Date/DST on a non-display Keypad:
Note: Model 701 does not allow for the time to be set.
1. To change the Time/Date, using the Keypad, input #65 + Authorized User ID and Combination + 10-digit Time Date (YY-MM-
DD-24HR Clock) + Return Key.
2. To change DST, using the Keypad, input #63 + Authorized User ID and Combination + Enable DST (1) or Disable DST (0) +
Return Key.
3. The Keypad will beep three times and flash a green LED once complete.
3.7 Assign Time Lock Schedules
(704 & 705 Models Only)
This section outlines how to assign pre-loaded Schedules and view pre-loaded Holidays from the Keypad. To load specific dates and
times to Schedules and Holidays from the PC software. Refer to section 5.5 Add Time Lock Schedules for more information.
The Time Lock feature can restrict access to a safe lock at specific times during the week or allow access for an entire day, a day
spans midnight to midnight of the next day.
Follow these steps to create time access periods from a week per lock or view Holiday lockout day(s):
1. Navigate through the Main Menu and select Time Lock.
2. To Assign Access, do the following:
a. Select Assign Access
b. For multi-lock Systems, select the lock by pressing the corresponding number on the number pad. Otherwise, skip
to the next step
c. Choose between 24/7 Access or a pre-loaded Schedule
3. To View Access, do the following:
a. Select View Access