User's Guide

dormakaba USA Inc. System User Guide 7040.0320 | 36
3.11.4.2 Allow Time Delay Override – Non-Display Keypad
Note: This function is not available on the 701 series of Keypad,
Follow these steps to Allow Time Delay Override to a safe lock on a non-Display Keypad:
1. Using the Keypad, input #73 + Master ID and Combination + Allowed (1) or Not Allowed (2) + Return Key.
2. The Keypad will beep three times and flash a green LED once complete.
3.11.5 Open Lock During Time Delay Using Override with Combo
3.11.5.1 Open Lock During Time Delay Using Override with Combo – Display Keypad
Follow these steps to Open a lock during a Time Delay using Override on a Display Keypad:
1. Using the Keypad, input the User ID and Combination.
2. For multi-lock systems, select the corresponding lock number on the keypad. Otherwise, skip to the next step.
3. Lock ‘N’ Start Delay will appear on screen where ‘N’ represents the lock number. The screen will then provide timer feedback.
4. There is no continuous feedback. A key must be pressed to check on the Time Delay status. When a key is pressed, the Keypad
will display the feedback for the ‘most urgent’ lock.
5. Press a key to exit the Time Delay Status screen.
6. Input the User ID and Combination.
7. From the Time Delay Menu, select Open Lock.
a. For multi-lock systems, select the corresponding lock number on the keypad
b. If the selected lock has Time Delay and Time Delay Override enabled, and the User has Time Delay Override w/
Combo privileges for the lock, then the lock will open
3.11.5.2 Open Lock During Time Delay Using Override with Combo – Non-Display Keypad
Follow these steps to Open a lock during a Time Delay using Override w/ Combo on a Non-Display Keypad:
1. Using the Keypad, input the User ID and Combination.
2. If the lock has Time Delay Override enabled and the User has Time Delay Override w/ Combo privileges, the lock will open.