User's Guide

dormakaba USA Inc. System User Guide 7040.0320 | 44
1. Any key wakes up the system.
2. # key starts the sequence of # Commands.
3. Only applicable for Model 701 and 702.
4. Any # key pressed during a key Keypad sequence will cancel the sequence.
5. If a # key press is used to cancel a sequence (# Command or open lock sequence) and the intent for a new sequence is to:
a. enter a # Command, another # key press is required to start the sequence
b. open the lock, pressing keys to identify the ID will be the next step
6. If dual user mode is enabled, and a # Command is entered that requires 2 combinations, then the examples below would
necessarily need the PIN for the second user.
7. A return key generally submits the prior keystrokes to the embedded system for interpretation.
a. if the very first key stroke on wakeup is a return key, it is ignored
b. if the first key is a # key followed by a return key, the # Command Keypad is terminated (and ignored)
8. A user PIN is a 2-digit ID followed by 6 to 9 combination digits.
9. The Master PIN in a 2-digit ID (00) followed by 8 combination digits.
10. Rows shaded in yellow are only available on Model 702.
Table 8 – # Commands
Function
# Structure Definition
Example Key Strokes
Notes
Open Lock #1 –
Single User
<User PIN>
03123456
User ID = 03, combo is 123456. Note that
the system in this example is set for 6 digits
combo length and once the last expected
digit is entered, the PIN is validated and
lock opened if allowed.
Open Lock #1 -
Dual User
<User 1 PIN><User 2 PIN>
0312345604654321
There will be no indication of when the 2nd
ID is entered due to the varying length of
the combination. First ID = 03 with combo
123456, 2nd ID is 04, combo is 654321. No
Return key is required as the system knows
that dual users are required and knows the
expected combo length.
Set Combo
Length
#11<Master PIN><1 digit
length (6-9)><rtn key>
#1100123456786<rtn key>
Master ID = 00, Master combo is 12345678,
combo length will be set to 6 digits. Note,
there are special rules for existing users'
combos when changing combo length. See
User's guide for details on how existing
users will be affected.
Function
# Structure Definition
Example Key Strokes
Notes
Set User Mode
#12<Master PIN><1 digit user
mode><rtn key>
#1200123456781<rtn key>
Master ID = 00, Master Combo is
12345678, Dual mode enabled, does not
apply to mgrs.
Digit User Mode is defined as
0 = Single User
1 = Dual User, does not apply to mgr
2 = Dual User, applies to mgr
Set Duress for
system
enable/disable
#14<Master
PIN><0:disabled,1:enabled><rt
n key>
#1400123456781<rtn key>
Master ID = 00, master combo is 12345678.
1= enable
Install Lock
#22<Master PIN><rtn key>
#220012345678<rtn key>
Master ID = 00, Master combo is 12345678.