User's Manual

CommissioningTechnical Manual
4304047408 - 10/2020 dormakaba access manager 92 009200-K7 TP4-Client
6.1.2 Change network parameters with 'MATRIX Device Scanner'
The program 'MATRIX Device Scanner' finds dormakaba devices with an Ethernet interface
on a network.
MATRIX Device Scanner
Ethernet
subnet 1
MAC 2
Type B
MAC 3
Type A
MAC 1
Type A
Prerequisites
• The necessary ports are activated on the network.
• The devices are installed and available.
• The devices can be found in the same subnet.
• Microsoft Windows compatible laptop
– LAN interface
– Network setting:
- Automatically get IP address (DHCP on)
- Automatic private IP address (APIPA)
 With this setting, devices are found on networks without a DHCP server.
Functions The program offers the following functions.
• The network parameters of the devices can be set for the initial setup.
– Use DHCP
– Assign static IP (IP address, network mask, gateway IP)
• The IP addresses of the devices are discoverable.
Installation The program must be installed on a laptop. The installer can be found on the MATRIX DVD in
the folder 'MATRIX Device Scanner'.
Illustration After program start-up, dormakaba devices are searched for on the network. The devices
found are listed.
Columns
Type MAC address IP address Action Comment
Column Explanation
Type The type of the devices
MAC address The MAC address of the devices
Note: The MAC address can be found on a label on the devices.
IP address The current IP address of the devices
Action • Empty field
The network parameters are set.
• Change network setting...
The network parameters must be set.
Comment • Empty field
The network parameters must be set.
prelimenary