User's Manual
Commissioning Technical Manual
46 04047408 - 10/2020dormakaba access manager 92 00 9200-K7 TP4-Client
6.3 Initialise the device for Mobile Access
See also:
- Mobile Access system overview [}3.3]
- Planning guideline, Mobile Access
Initialisation depends on the readers used.
Reader Initialisation
Registration unit The access manager is initialised via a registration unit.
Compact reader Every compact reader must be initialised.
Remote reader Every remote reader must be initialised via a registration unit.
Prerequisites
General • The access control system is set up by dormakaba for Legic Connect
System software • See the chapter System requirements
• A connection has been set up to Legic connect
Reader • The reader supports Mobile Access.
• The reader is configured in the system software for Mobile Access.
• The configuration is transferred.
• The reader is installed and ready for operation.
Smartphone • The VCP Installer is installed and registered with the telephone num-
ber with Legic Connect.
The registration code received via SMS is entered.
• Access to the Internet is possible (WLAN or mobile data).
• The password for the VCP file is known.
Procedure
• On the smartphone:
– Start the VCP Installer.
– Ensure that the method of transmission of the smartphone and the device is identical
Select the transmission type NFC or Bluetooth.
– Select the VCP file.
If the desired VCP file is not present, select ‘Update’. Then, the smartphone down-
loads the VCP file.
– Select ‘Send’.
– Input the password for the VCP file.
– Transmission type:
NFC Bluetooth
Hold the smartphone in
front of the reader.
Keep the smartphone
within Bluetooth range of
the device.
If a device other than the
one desired flashes: In the
system software, match
the ‘RSSI filters’ of the
devices.
prelimenary