Other Content

INSTALL/REMOVAL INSTRUCTIONS: WINDOW REGULATOR
741-754
Disclaimer:
Even though every attempt is made to ensure this information is complete and accurate, it is impossible to account for all possible circumstances or situations. Please consult with a quali ed auto technician
before attempting to perform any work you are not quali ed to do. Automobiles can be hazardous to work on; be sure to take all necessary safety precautions. Failure to do so may result in property damage
or personal injury. Certain motor vehicle standards and performance requirements may apply to your motor vehicle (such as Federal Motor Vehicle Safety Standards by the National Highway Tra c Safety
Administration). Be sure that your work is performed in accordance with such standards and that you do not disable any motor vehicle safety feature.
ATTENTION: Refer to the appropriate shop manual for your vehicle to obtain speci c service procedures for this part. If you do not have
a service manual or lack the skill to install this part, it is recommended that you seek the services of a quali ed technician. Pay special
attention to all cautions and warnings included in the shop manual. Read and follow all instructions carefully.
6
©2012 Dorman Products, Inc.
No reproductions in whole or in part without prior written approval.
Installation Instructions
STEP 3: Once the window regulator has been installed, manually lower the window glass
into position to attach onto the window regulator.
STEP 1: Install the window regulator
through the access hole.
STEP 2: Install the window regulator onto
the door and connect the window lift motor
connector. NOTE: If you do not have access
to a large rivet gun capable of handling ¼”
x ¾” rivets, it is okay if you use ¼” x 20 x up
to 1” bolts washers and the corresponding
nylon locking nuts when installing the
window regulator onto the door.