W H O L E S A L E C ATA L O G Connect with Confidence Gas Appliance Connectors & Plumbing Supplies Dormont.
! WARNING This literature is not intended to replace the available installation instructions or the experience of a trained product installer. Please refer to the installation manual for further information and product warnings.
RANGE TABLE CONNECTORS OF CONTENTS Range Connectors ............................................................................................................6-7 Furnace Connectors .........................................................................................................8-9 Dryer Connectors..........................................................................................................10-11 Water Heater Connectors....................................................................
A COMPLETE LINE OF GAS CONNECTORS FOR ALL TYPES OF GAS APPLIANCES Stainless Steel Gas Connectors Durable, naturally corrosion-resistant 304 stainless steel gas connectors for indoor or outdoor stationary appliance applications. Coated Stainless Steel Gas Connectors SafetyShield® coating provides easy gas line identification and extra protection from chemical corrosion from accidental contact with household chemicals. Consistent coverage provides protection along the entire length of the connector.
DURABLE, CORROSION–RESISTANT STAINLESS STEEL TUBING Exclusive No-Neck® design increases tubing flexibility. Design certified Safety and quality Quality flared end adapters For indoor and outdoor use. Consistent quality ensures a safe product you can trust. create a metal to metal seal to ensure integrity in critical applications. Features Benefits 304 stainless steel........................................................................ Durable, corrosion-resistant construction No Neck® design....
SuprSense® ® Excess Flow Valve The Dormont SuprSense® Excess Flow Valve is a precision-manufactured device consisting of two body pieces and an internal valve mechanism. Under normal conditions, the valve remains opened, allowing gas to flow at normal gas line flow rates. In the event of a complete downstream gas line rupture, which causes excess gas flow, the SuprSense automatically activates - greatly reducing the gas flow.
PART NUMBERING SYSTEM Gas Connectors Character 1: Diameter of connector (choose one) Part # 1 3/8" OD (1/4" ID) 2 1/2" OD (3/8" ID) 3 5/8" OD (1/2" ID) XL3 5/8" OD (1/2"ID) EFV Tubing 4 1" OD (3/4" ID) 5 1-1/4" OD (1" ID) 6 1-1/2" OD (1-1/4" ID) 15 /16 "16 t n: tio 5/8 "O D Fla re ( ip De sc r ed 3/8 "F tin Fit le ng n "i Character 2: Coating Part # O Corrugated Tubing OA Low-visibility Black OC SafetyShield Yellow Coating 1 Hot-Dipped Gray PVC Coating 1P 15 PSIG Connector with HotDipped, Gray PV
RANGE CONNECTORS Made in USA Supr-Safe® Stainless Steel MIP end MIP EFV end With SuprSense EFV (Excess Flow Valve) 30 Series 5/8" OD (1/2" ID) Model Number XL30-4141V5-36 XL30-3141V5-36 XL30-313MV6-36 XL30-4141V5-48 XL30-3141V5-48 XL30-313MV6-48 XL30-4141V5-60 XL30-3141V5-60 XL30-313MV6-60 XL30-4141V5-72 XL30-3141V5-72 XL30-313MV6-72 Ordering Code 0241897 0241898 0241899 0241927 0241928 0241929 0241949 0241950 0241951 0241971 0241972 0241973 Description 3/4" MIP x 3/4" MIP SuprSense x 36"L 1/2" MIP
RANGE CONNECTORS Made in USA SafetyShield® Yellow Coated Stainless Steel 3 1 0C 2 EXAMPLE 31 32 3 4 MIP EFV end With SuprSense EFV (Excess Flow Valve) 30C Series 5/8" OD (1/2" ID) Part# Character MIP end Model Number 48 5 Connection End Guide Characters 3 & 4: Choice of fitting or valve for both ends of connector (choose two) Part # 21 3/8" MIP (Tapped 1/4" FIP) 22 3/8" FIP 23 3/8" MIP Elbow 24 3/8" FIP Elbow 31 1/2" MIP (Tapped 3/8" FIP) 3MV6 5/8" OD x 1/2" MIP EFV 31V4 1/2" OD x 1/2" MIP EFV 3
FURNACE CONNECTORS Made in USA Supr-Safe® Stainless Steel MIP end MIP EFV end With SuprSense EFV (Excess Flow Valve) 30 Series 5/8" OD (1/2" ID) Model Number XL30-4141V5-12 XL30-3141V5-12 XL30-313MV6-12 XL30-4141V5-18 XL30-3141V5-18 XL30-313MV6-18 XL30-4141V5-24 XL30-3141V5-24 XL30-313MV6-24 XL30-4141V5-30 XL30-3141V5-30 XL30-313MV6-30 XL30-4141V5-36 XL30-3141V5-36 XL30-313MV6-36 Ordering Code 0241768 0241769 0241770 0241801 0241802 0241803 0241834 0241835 0241836 0241867 0241868 0241869 0241897 0241
FURNACE CONNECTORS Made in USA SafetyShield® Yellow Coated Stainless Steel 3 1 0C 2 EXAMPLE 31 32 3 4 MIP EFV end With SuprSense EFV (Excess Flow Valve) 30C Series 5/8" OD (1/2" ID) Part# Character MIP end Model Number 48 5 Connection End Guide Characters 3 & 4: Choice of fitting or valve for both ends of connector (choose two) Part # 21 3/8" MIP (Tapped 1/4" FIP) 22 3/8" FIP 23 3/8" MIP Elbow 24 3/8" FIP Elbow 31 1/2" MIP (Tapped 3/8" FIP) 3MV6 5/8" OD x 1/2" MIP EFV 31V4 1/2" OD x 1/2" M
DRYER CONNECTORS Made in USA MIP end Supr-Safe® Stainless Steel MIP EFV end With SuprSense EFV (Excess Flow Valve) 20 Series 1/2" OD (3/8" ID) Model Number 20-3131V4-36 20-2131V4-36 20-2231V4-36 20-3231V4-36 20-3131V4-48 20-2131V4-48 20-2231V4-48 20-3231V4-48 20-3131V4-60 20-2131V4-60 20-2231V4-60 20-3231V4-60 20-3131V4-72 20-2131V4-72 20-2231V4-72 20-3231V4-72 Ordering Code 0241904 0241905 0241906 0241907 0241934 0241935 0241936 0241937 0241956 0241957 0241958 0241959 0241978 0241979 0241980 02419
DRYER CONNECTORS Made in USA SafetyShield® Yellow Coated Stainless Steel Model Number Category K 3 1 0C 2 EXAMPLE 31 32 3 4 MIP EFV end With SuprSense EFV (Excess Flow Valve) 20C Series 1/2" OD (3/8" ID) Part# Character FIP end 48 5 Connection End Guide Characters 3 & 4: Choice of fitting or valve for both ends of connector (choose two) Part # 21 3/8" MIP (Tapped 1/4" FIP) 22 3/8" FIP 23 3/8" MIP Elbow 24 3/8" FIP Elbow 31 1/2" MIP (Tapped 3/8" FIP) 3MV6 5/8" OD x 1/2" MIP EFV 31V4 1/2" OD
WATER HEATER CONNECTORS Made in USA Supr-Safe® Stainless Steel MIP end MIP EFV end With SuprSense EFV (Excess Flow Valve) 20 Series 1/2" OD (3/8" ID) Model Number 20-3131V4-12 20-2131V4-12 20-2231V4-12 20-3231V4-12 20-3131V4-18 20-2131V4-18 20-2231V4-18 20-3231V4-18 20-3131V4-24 20-2131V4-24 20-2231V4-24 20-3231V4-24 20-3131V4-30 20-2131V4-30 20-2231V4-30 20-3231V4-30 Ordering Code 0241775 0241776 0241777 0241778 0241808 0241809 0241810 0241811 0241841 0241842 0241843 0241844 0241874 0241875 02
WATER HEATER CONNECTORS Made in USA SafetyShield® Yellow Coated Stainless Steel Model Number Category L 3 1 0C 2 EXAMPLE 31 32 3 4 MIP EFV end With SuprSense EFV (Excess Flow Valve) 20C Series 1/2" OD (3/8" ID) Part# Character FIP end 48 5 Connection End Guide Characters 3 & 4: Choice of fitting or valve for both ends of connector (choose two) Part # 21 3/8" MIP (Tapped 1/4" FIP) 22 3/8" FIP 23 3/8" MIP Elbow 24 3/8" FIP Elbow 31 1/2" MIP (Tapped 3/8" FIP) 3MV6 5/8" OD x 1/2" MIP EFV 31V4 1
SPACE HEATER CONNECTORS Made in USA MIP end Supr-Safe® Stainless Steel MIP EFV end With SuprSense EFV (Excess Flow Valve) 10 Series 3/8" OD (1/4" ID) Model Number 10-3131V2-12 10-2131V2-12 10-2231V2-12 10-3231V2-12 10-3131V2-18 10-2131V2-18 10-2231V2-18 10-3231V2-18 10-3131V2-24 10-2131V2-24 10-2231V2-24 10-3231V2-24 10-3131V2-30 10-2131V2-30 10-2231V2-30 10-3231V2-30 10-3131V2-36 10-2131V2-36 10-2231V2-36 10-3231V2-36 10-3131V2-48 10-2131V2-48 10-2231V2-48 10-3231V2-48 10-3131V1-60 10-2131V1-60 10-22
SPACE HEATER CONNECTORS SafetyShield® Yellow Coated Stainless Steel Made in USA FIP end MIP EFV end With SuprSense EFV (Excess Flow Valve) Model Number 10C Series 3/8" OD (1/2" ID) Category K Part# Character 3 1 0C 2 EXAMPLE 31 32 3 4 48 5 Connection End Guide Characters 3 & 4: Choice of fitting or valve for both ends of connector (choose two) Part # 21 3/8" MIP (Tapped 1/4" FIP) 22 3/8" FIP 23 3/8" MIP Elbow 24 3/8" FIP Elbow 31 1/2" MIP (Tapped 3/8" FIP) 3MV6 5/8" OD x 1/2" MIP EFV 31V4 1/2" OD
GAS LOG CONNECTORS Made in USA FIP end MIP EFV end LV Black Coated With SuprSense EFV (Excess Flow Valve) 10A Series 1/2" OD (3/8" ID) 10ANW Series 3/8" OD (1/2" ID) Model Number 10A-2131V2-12 10A-3131V2-12 10A-3131V2-18 10A-2231V2-18 10A-3231V2-18 10A-2131V2-24 10A-3131V2-24 10A-2231V2-24 10A-3231V2-24 10A-2131V2-30 10A-3131V2-30 10A-2231V2-30 10A-3231V2-30 Ordering Code 0241793 0241794 0241827 0241829 0241828 0241859 0241860 0241862 0241861 0241890 0241891 0241893 0241892 Description 3/8" MIP x 1/2
GAS LOG CONNECTORS Made in USA MIP end LV Black Coated MIP EFV end With SuprSense EFV (Excess Flow Valve) Model Number 20A Series 30C 3/8" OD (1/2" ID) 5/8" 20ANW Series 1/2" OD (3/8" ID) Part# Character 3 1 0C 2 EXAMPLE 31 32 3 4 48 5 Connection End Guide Characters 3 & 4: Choice of fitting or valve for both ends of connector (choose two) Part # 21 3/8" MIP (Tapped 1/4" FIP) 22 3/8" FIP 23 3/8" MIP Elbow 24 3/8" FIP Elbow 31 1/2" MIP (Tapped 3/8" FIP) 3MV6 5/8" OD x 1/2" MIP EFV 31V4 1/2" OD
WALL HEATER CONNECTORS Made in USA SafetyShield® Yellow Coated Stainless Steel 10C Series 3/8" OD (1/2" ID) FIP end MIP EFV end With SuprSense EFV (Excess Flow Valve) Model Number 10C-3131V2-12 10C-2131V2-12 10C-2231V2-12 10C-3231V2-12 10C-3131V2-18 10C-2131V2-18 10C-2231V2-18 10C-3231V2-18 10C-3131V2-24 10C-2131V2-24 10C-2231V2-24 10C-3231V2-24 10C-3131V2-30 10C-2131V2-30 10C-2231V2-30 10C-3231V2-30 10C-3131V2-36 10C-2131V2-36 10C-2231V2-36 10C-3231V2-36 10C-3131V2-48 10C-2131V2-48 10C-2231V2-48 10
WALL HEATER CONNECTORS Made in USA LV Black Coated MIP EFV end FIP end With SuprSense EFV (Excess Flow Valve) Model Number 10A Series 3/8" OD (1/4" ID) Part# Character 3 1 0C 2 EXAMPLE 31 32 3 4 48 5 Connection End Guide Characters 3 & 4: Choice of fitting or valve for both ends of connector (choose two) Part # 21 3/8" MIP (Tapped 1/4" FIP) 22 3/8" FIP 23 3/8" MIP Elbow 24 3/8" FIP Elbow 31 1/2" MIP (Tapped 3/8" FIP) 3MV6 5/8" OD x 1/2" MIP EFV 31V4 1/2" OD x 1/2" MIP EFV 31V2 3/8" OD x 1/
HIGH BTU CONNECTORS Made in USA MIP end FIP end Ultra Flow High BTU Gas Connectors ® Model Number 40/41/40C Series 1" OD (3/4" ID) 50/51 Series 1-1/4" OD (1" ID) 60/61 Series 1-1/2" OD (1-1/4" ID) 41-4142-12 41-4142-18 41-4142-24 41-4142-30 41-4142-36 41-4142-48 41-4142-60 41-4142-72 51-5152-12 51-5152-18 51-5152-24 51-5152-30 51-5152-36 51-5152-48 51-5152-60 51-5152-72 61-6162-12 61-6162-18 61-6162-24 61-6162-30 61-6162-36 61-6162-48 61-6162-60 61-6162-72 Ordering Code 0240923 0240937 0240186 024018
HIGH BTU CONNECTORS Made in USA SafetyShield® Yellow Coated High Btu Stainless Steel Model Number 40C-4142-12 40C-4142-18 40C-4142-24 40C-4142-30 40C-4142-36 40C-4142-48 40C-4142-60 Ordering Code 0240884 0240908 0240927 0240939 0240950 0240969 0240986 MIP end Description 3/4" MIP x 3/4" FIP x 12"L 3/4" MIP x 3/4" FIP x 18"L 3/4" MIP x 3/4" FIP x 24"L 3/4" MIP x 3/4" FIP x 30"L 3/4" MIP x 3/4" FIP x 36"L 3/4" MIP x 3/4" FIP x 48"L 3/4" MIP x 3/4" FIP x 60"L FIP end Pack Quantity 1 1 1 1 1 1 1 Coated Co
TANKLESS WATER HEATER CONNECTION KITS Lead Free* Tankless Water Heater Connection Kits Model Number LFTV75 Series 1" OD (3/4" ID) LFTV75FKIT18 Ordering Code 0242438 LFTV75FKIT24 0242439 LFTV75FKIT36 0242440 LFTV75KIT18 0242441 LFTV75KIT24 0241448 LFTV75KIT36 0242442 LFTV75FKIT18NW 0242443 LFTV75FKIT24NW 0242444 LFTV75FKIT36NW 0242445 LFTV75KIT18NW 0242446 LFTV75KIT24NW 0242447 LFTV75KIT36NW 0242448 LFETV75FKIT24 0242449 LFETV75KIT24 0242450 Description Gas Tankless Water Heate
LP LP GAS GAS CONNECTORS CONNECTOR Made in USA 31P Series 5/8" OD (1/2" ID) Applications Advantages • From 1st stage regulator on LP tank to riser • From riser to 2nd stage regulator at the home • From LP tank to home • Safe and easy alternative to typical copper or polyethylene connectors • Increase productivity with quick installation because fittings are already attached • No cutting or flaring of copper needed which saves time and material • 304 stainless steel tubing significantly reduces the
MANUFACTURED HOME GAS CONNECTOR KITS 30 and 31 Series 5/8" OD (1/2" ID) 40 and 41 Series 1-1/4" OD (1" ID) 50 Series 1-1/2" OD (1-1/4" ID) Standard Gas Connector Kits Model Number 7010-3132 Ordering Code 0241071 7020-4142 0241023 7030-4142 0241058 Description (1) #30-3132-24" Gas Connector (1/2" MIP x 1/2" FIP) 1/2" quick-disconnect, (1) Dust Cap and Dust Plug, (1) Warning Tag (1) #30-4142-24" Gas Connector (3/4" MIP x 3/4" FIP) 3/4" quick-disconnect, (1) Dust Cap and Dust Plug, (1) Warning Tag (1)
MOVEABLE FOODSERVICE CONNECTORS AND ACCESSORIES 1650 Series 5/8" OD (1/2" ID) 1675 Series 1" OD (3/4" ID) 16100 Series 1-1/4" OD (1" ID) High BTU commercial gas cooking equipment requires specifically designed gas connection systems to ensure that they are supplied with the correct amount of gas to function properly. Dormont recommends the following components for a maximum CODE-COMPLIANT foodservice equipment installation.
GAS ADAPTERS AND SHUTOFF VALVES Made in USA Gas Adapters Model Number 30 Series 5/8" OD (1/2" ID) Easy to Use Handle • Handles are ergonomically designed for smooth turns. • Quarter-turn handle design makes for easy on/off operation. • Most handles feature a lockout for added safety.
GAS APPLIANCE AND LINE PRESSURE REGULATORS Dormont gas appliance and line pressure regulators are designed for main burner and/or pilot applications, where precise control of tiny flows is an essential operating requirement. • Housings are high strength aluminum castings. • All models have been tested for multi-position mounting and may be installed in any plane or angle without restriction. • They may be used with natural, manufactured, mixed, LP, or LP gas-air mixture.
Supr-Safe® STAINLESS STEEL GAS CONNECTOR SPECIFICATIONS Supr-Safe® Stainless Steel Gas Connector Specifications FIP end Features and Specifications Applications • Tubing................ Annealed, 304 stainless steel (ASTM A240) • Flare nuts........... Brass or plated steel • Adapters............. Brass or plated steel Meets SAE J512 standard – 45° flare (with the exception of 15/16" – 16 threads of 5/8" OD) • Optional coating..
SafetyShield® YELLOW COATED GAS CONNECTOR SPECIFICATIONS SafetyShield® Yellow Coated Gas Connector Specifications FIP end MIP end Features and Specifications Design Certifications and Approvals • Tubing................ Annealed, 304 stainless steel (ASTM A240) • Coating............... Custom Formulated Polymer • Flare nuts........... Brass or plated steel • Adapters.............
LV BLACK COATED GAS CONNECTOR SPECIFICATIONS LV Black Coated Gas Connector Specifications MIP end Specifically engineered for high-temperature applications such as gas logs, fireplace inserts, and free-standing fireplaces FIP end • Designed to reduce glare and hide the connector from view to enhance the beauty of the hearth. • Hi-temperature black coating hides the connector while withstanding up to 350°F.
Ultra Flow® HIGH BTU GAS CONNECTOR SPECIFICATIONS MIP end High BTU Stainless Steel Gas Connectors FIP end Features and Specifications • Tubing Annealed, 304 stainless steel (ASTM A240) • Flare nuts Brass or plated steel • Adapters Brass or plated steel • Optional coating Heavy-duty, antimicrobial, hot-dipped gray PVC (41, 51 & 61 series). Coating will not hold a flame.
PORTABLE OUTDOOR GAS CONNECTOR SPECIFICATIONS Portable Outdoor Gas Connector Features 3/8" Model: 3 /8" ID Hose with 3/8" Female Flare x 3/8" Female NPT Quick Disconnect 1/2" Model: 1 /2" ID Hose with 1/2" Female Flare x 1/2" Female NPT Quick Disconnect Available in 10' and 12' lengths Gas Hose Connector listed to ANSI Z21.54/CSA 8.4 Quick Disconnect listed to ANSI Z21.41/CSA 6.9 Pressure and Temperature Working Pressure: 1/2 psi / .
CERTIFICATIONS This is a representative list of certifications carried by Dormont Manufacturing. Not all products carry all certifications. Product certifications are listed on the applicable product page. Contact Dormont Manufacturing at 1-800-DORMONT for additional information. USA United Kingdom (UK) Canada Canadian Standards Association British Standard Institute ANSI Z21.24 /CSA6.10 Connectors for Gas Appliances ANSI Z21.69 /CSA 6.
DORMONT SHOWROOM AND POP ACCESSORIES Vinyl Pegboard Display Quick and easy to assemble, the Dormont vinyl POP display simply attaches onto existing pegboard or slatwall. The base is 24" x 55" and has a variety of accessories to create a custom display! Call Customer Service for an order form. Free Standing Display The D-D-RESPOP features an attractive but tough powder-coat finish. Product can be displayed on standard peg hooks or with special ganghooks, (see below).
Connect with Confidence With Dormont, you—and your customers— gain the security of knowing… With Dormont, you—and your customers— gain the quality assurance of… very connector is backed by THE safe E installation of more than 115 million gas connectors over 50 years. ■ Every connector is 100% leak tested. ■O ur products are specified and preferred by gas utilities, housing authorities, professional installers, and restaurant chains nationwide.
NOTES 36 (800) 367-6668 ■ dormont.
A Watts Water Technologies Company C-D-Wholesale 1523 USA: Tel: (800) 367-6668 • Fax: (724) 733-4808 • Dormont.com Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • Dormont.ca Latin America: Tel: (52) 81-1001-8600 • Fax: (52) 81-8000-7091 • Dormont.