User manual
Table Of Contents
- Congratulations on your purchase
- Get started
- Insert SIM card, memory card and battery
- Remove the battery cover
- Insert the SIM card (required) and the memory card (optional)
- Insert the battery and replace the battery cover
- Get to know your phone
- Assistive functions
- Calls
- Make a call
- Phonebook
- Add contact
- Assistance button
- Make an assistance call
- Messages
- Create and send text message (SMS)
- Camera (take photos)
- Adjustments
- Camera settings
- Gallery
- Connectivity
- Bluetooth®
- Sound & Display
- Audio setup
- Additional functions
- Alarm
- Troubleshooting
- Safety instructions
- Network services and costs
- Care and maintenance
- Warranty
- Copyright and other notices
- Content copyright
- Specifications
- Hearing aid compatibility
English
• Press and hold shortcut button
#
to activate or deactivate silent
mode.
Headset
When a headset is connected, the internal microphone in the phone is au-
tomatically disconnected. If available, use the answer key on the headset
to answer and end calls.
CAUTION
Using a headset at high volume may damage your hearing. Adjust the
volume level carefully when using a headset.
Call options
During a call the selection buttons
1
( ) give access to additional
functions.
Options (left selection button)
• Volume to adjust the volume.
• Hold single call/Retrieve single to hold/retrieve the current call.
• End single call to end the current call (same as
).
• New call to call another number (Conference).
• Phonebook to search the phonebook.
• Messages to write or read text messages.
• Mute to disable the microphone.
SPK on (right selection button)
The loudspeaker allows you to speak without holding the phone close to
the ear.
1. Press SPK on to activate. Speak clearly into the phone microphone at
a maximum distance of 1 m. Use
/ to adjust the loudspeaker
volume.
2. Press SPK off to return to normal mode.
Note! Loud background noises (music, etc.) may interfere with the sound
quality.
11
1. Selection buttons have multiple functions. The current function is shown
above the selection button on the display.