User manual

Table Of Contents

English

3. Press Ok to confirm.

Note! You must write a message if you activate the SMS function.

Assistance settings

Confirm with "0"

You can activate the Confirm with "0" function. This is especially recom-

mended if there is a risk that the assistance call is answered by a voice mail

or answering service. If the recipient doesn’t press

within 60 seconds

the call will be disconnected and the next number in the sequence will be

called. If the recipient presses

within 60 seconds, the call is confirmed

and no further call attempts will be made (assistance sequence

interrupted).

1. Press Menu � Settings � Assistance � Confirm with "0".

2. Select On to enable, or Off to disable.

3. Press Ok to confirm.

Signal type

Select the notification signal type for the assistance sequence.

1. Press Menu � Settings � Assistance � Signal type:

• High to use loud signals (default).

• Low to use one low signal.

• Silent no sound indication, like a normal call.

2. Press Ok to confirm.

Messages

Create and send text message (SMS)

Note! Before you can send any text messages, you need to save your

message centre number. The number to your service centre is supplied by

your service provider and is usually set on the SIM card. If not, you can

enter the number yourself. See SMS centre, p.26.

1. Press shortcut button

or press Menu � Messages � Create new � SMS.

2. Write your message, see Enter text

, p.6, then press To.