User manual

3
English
Batteries
ThetelephonerequiresfourtypeAA1.5Vbatteriessothatalarm
numbers,memoryetc.continuetofunctionintheeventofpower
failure.
Whenthebatteriesarerunninglowthe
7
symbolilluminates.
Onlyusehighqualitybatteries.
1.Unplugthetelephoneandremovethecoveronthebaseofthe
telephonebylooseningthescrew.
2.Insertthebatteriesaccordingtothemarkingsforplusand
minus terminals.
3.Replacethebatterycoverandreconnectthetelephonecord.
To change batteries in the cordless alarm unit
Ifthecordlessalarmunitceasestofunctionchangethebattery
asfollows:
1.UseaPhillipsscrewdrivertoloosenthescrewonthebackand
separatethepartsbygentlyturningaatscrewdriverinthe
grooveontheunderside.
2.Exchangethe12Vbatteryforanewonefollowingthe
markingsforplusandminusterminals.
3.Reassemblethepartsandscrewtogether.
Locating the telephone
Whenselectingasiteforthemainunit,bearinmindthefollowing:
• AlwaysconnectDoroSecure347totherstnetworkwall
socket.
• DonotplacethetelephonenearotherequipmentsuchasTVs,
computermonitors,radiatorsetc.Thisistominimizetherisk
ofanyinterference.
• Donotplacetheequipmentinalocationwhereitwillbe
exposedtodirectsunlightorothermajorheatsources.
Onveryrareoccasions,therubberfeetonthebaseofthe
devicemayleavemarksonthesurfaceonwhichitisplaced.
Takecarewhenplacingitonasensitivesurface.