Instruction manual

5.6 Mounting Additional Accessories

5.6.1 Quick-Clamp w/ Interface for Mizuho-Type Retractors

Use the Quick-Clamp w/ Interface for Mizuho-Type Retractors, Item-No. 1201.045, to connect

Mizuho-Type Retractors to the DORO Skull Clamp 3003-00 or 1001.001.

1. Mount the Quick-Clamp w/ Interface for Mizuho-Type

Retractors (1201.045) on the Quick-Rail of the Skull Clamp

(3003-00 or 1001.001) over the sterile drape that is covering

the Skull Clamp. Fully tighten the Locking Screw of the

Quick-Clamp w/ Interface for Mizuho-Type Retractors by tur-

ning it clockwise. (Picture shows Quick-Clamp w/ Interface

for Mizuho-Type Retractors mounted on QR3 Skull Clamp

without sterile drape).

2. To mount the Mizuho-Type Retractor Arm, insert the con-

nection piece of the Retractor Arm into the reception of

the Quick-Clamp until the stop is reached and position the

retractor arm as desired.

3. Securely tighten the locking screw of the Quick-Clamp w/

Interface for Mizuho-Type Retractors by turning it clockwise.

The teeth of the starbust connections must be fully engaged

and seated properly.

5.6.2 Quick-Clamp and Accessories

Connecting the DORO Quick-Clamp to the Skull Clamp 3003-00 or 1001.001

1. Mount the Quick-Clamp (1202.014) on the Quick-Rail of the

Skull Clamp (3003-00 or 1001.001) over the sterile drape

that is covering the Skull Clamp. Fully tighten the Locking

Screw of the Quick-Clamp by turning it clockwise. (Picture

shows Quick-Clamp mounted on QR3 Skull Clamp without

sterile drape).



1202.014



5.5 Mounting of the DORO Easy Connect Navigation Adaptors

The Navigation Adaptors (1204.001/ 1204.002) can be attached directly to the built-in

starburst connections on each Quick-Rail of the QR3 Skull Clamp (1001.001). Please refer

to the instruction manual of the DORO Easy Connect Navigation Adaptors.

-14- -15-

DORO

Instruction Manual

DORO