Instruction manual

The following 3 steps - - are required:

Mount the Base Unit and the Swivel Adaptor to the OR

Table

1. Mount the Base Unit to the OR Table (see Chapter Moun-

ting).

2. Mount the Swivel Adaptor to the Transitional Member of

the Base Unit (see Chapter Mounting).

3. For ease in mounting, we recommend that the Transitio-

nal Member of the Base Unit and the Swivel Adaptor are

loosely connected (not fully tightened) and the Swivel

Adaptor is hanging loose and pointing to the floor.

6. Use and Handling

6.1 Detailed description of application

NOTE:

The user decides the best approach to secure the patient to the Skull

Clamp. We recommend to secure the patient‘s head rst to the Skull

Clamp with Skull Pins and then to connect the Skull Clamp carefully by

means of the Swivel Adaptor to the Base Unit and the OR Table.

A B C

Secure the patient's head to the Skull Clamp

(Item-No. 3003-00 or 1001.001)

Insert the Skull Pins into the receptacles of the Skull Clamp

(refer to instruction manual Skull Pins).

Adjusting the required Skull Clamp width:

1. Pull down the Release Knob at the Skull Clamp

base and pull the Extension Assembly away from the Skull

Clamp base to widen the Skull Clamp.

2. Place the patient’s head in the desired position within the

Skull Clamp. Push the Extension Assembly into the Skull

Clamp Base to reduce the Skull Clamp width.

↑

-17- -18-

DORO

Instruction Manual

DORO