Operation Manual

English

When the battery is running low, is displayed and a warning signal is

heard.

1. Connect the mains adapter to a wall socket and to the charging

socket y (A) or place the device in the cradle (B). Alternatively

connect the cable to the charging socket y on the phone and to

a USB port on a computer.

The battery charge indicator is animated while charging. It takes ap-

proximately 3 hours to fully charge the battery. When the charger is

connected to the phone,

is displayed briefly, and when it is

disconnected.

2. When charging is completed,

is displayed on the screen.

If the phone is turned off when the charger is connected to the

phone only the battery charge indicator will be shown on the display.

Note! To save power the LCD backlight goes off after a while. Press any

button to illuminate the display. Full battery capacity will not be reached

until the battery has been charged 3–4 times. Batteries degrade over

time, which means that call time and standby time will normally

decrease with regular use.