Operation Manual

English
• M: To use your hearing aid in this mode, make sure that your hearing
aid is set to "M-mode" or acoustic coupling mode, and position the
phones receiver near the hearing aid’s built-in microphone. For the
best results, try using the phone in different positions relative to your
hearing aid—for example, placing the receiver slightly above the ear
may result in better performance for hearing aids with microphones
positioned behind the ear.
• T: To use your hearing aid in this mode, make sure that your hearing
aid is set to "T-mode" or telecoil coupling mode (not all hearing aids
have this mode). For the best results, try using the phone in different
positions relative to your hearing aid—for example, placing the re-
ceiver slightly below or in front of the ear may result in better
performance.
See also Audio setup
, p.42 on how you can adjust the audio settings.
Phone settings
Time & date
Set the time and date
1. Press Menu
Settings General Time & date:
• Set time to enter the time (HH:MM).
• Set date to enter the date (DD/MM/YYYY).
2. Press OK to confirm.
Tip: You can also set the phone to automatically update the time and
date according to the current time zone. In Time & date select Auto time
On. Automatic update of date and time does not change the time you
have set for the alarm clock or the calendar. They are in local time.
Updating may cause some alarms you have set to expire depending on
network support and subscription.
Set the time and date format
1. Press Menu
Settings General Time & date Set
format:
• Time format
12 hours or 24 hours.
• Date format and select the desired date format.
2. Press OK to confirm.
8