Operation Manual

English
1. Connect the mains adapter to a wall socket and to the charging
socket y (A) or place the device in the cradle (B). Alternatively
connect the cable to the charging socket y on the phone and to
a USB port on a computer.
The battery charge indicator is animated while charging. It takes ap-
proximately 3 hours to fully charge the battery. When the charger is
connected to the phone,
is displayed briefly, and when it is
disconnected.
2. When charging is completed,
is displayed on the screen.
If the phone is turned off when the charger is connected to the
phone only the battery charge indicator will be shown on the display.
Note! To save power the LCD backlight goes off after a while. Press any
button to illuminate the display. Full battery capacity will not be reached
until the battery has been charged 3–4 times. Batteries degrade over
time, which means that call time and standby time will normally
decrease with regular use.
Save energy
When you have fully charged the battery and disconnected the charger
from the device, unplug the charger from the wall socket.
Get to know your phone
Assistive functions
Use the symbols below to guide you through supporting sections in the
manual.
Seeing
Handling
Hearing
Safety
Turn the phone on and off
1. Press and hold on the phone to turn it on or off. Confirm with
Yes to power off.
2. If the SIM card is valid but protected with a PIN code (Personal Iden-
tification Number), PIN is displayed. Enter the PIN code and press
OK (
upper left corner of keypad). Delete with Clear ( upper
right corner of keypad).
4