Doro PhoneEasy 622 ® English
1 2 20 23 19 3 4 5 6 7 14 13 12 11 10 22 18 15 17 21 16 9 8 English 1. Earpiece 2. Display 3. Arrow buttons 4. Left selection button 5. Call button 6. Speed dials 7. Voice mail 8. Input method/Silent 9. Camera shortcut 10. Message shortcut 11. Volume control 12. End call/Power on/off 13. Microphone 14. Right selection button 15. 16. 17. 18. 19. 20. 21. 22. Charging socket Headset socket Assistance button Camera lens Flash External display Loudspeaker Green light = New message / Missed call 23.
25 24
English Contents Installation ................................................................................ 1 Install the SIM card, memory card and the battery.................. 1 Charging .................................................................................... 2 Get to know your phone .............................................................. 3 Assistive functions ............................................................... 3 Turn the phone on and off ................................
English Create and send a voice message ..........................................18 Inbox, Outbox and Sent ........................................................18 Call log......................................................................................19 Retrieve and dial..................................................................19 Camera......................................................................................20 Camera (take photos) .............................................
English Vehicles ..............................................................................63 Care and maintenance ................................................................64 Warranty ....................................................................................64 Specifications ............................................................................64 Hearing aid .........................................................................65 Specific Absorption Rate (SAR) ................
English Installation IMPORTANT! Turn off the phone and disconnect the charger before removing the battery cover. Install the SIM card, memory card and the battery The SIM and memory card holder’s are located inside the battery compartment. 1 1. 2. 3. 4. 5. 2 3 4 5 Remove the battery cover and the battery if it is already installed. Optional: Insert the memory card into the slot under the SIM card holder.
English IMPORTANT! Use only compatible memory cards for use with this device. Compatible card type: microSD, microSDHC. Incompatible cards may damage the card itself, the device and corrupt data stored on the card. Depending on the market some phones may have a pre-installed memory card. Charging CAUTION Only use batteries, charger and accessories that have been approved for use with this particular model.
English Get to know your phone Assistive functions The following symbols indicate information in the manual about assistive functions for: Seeing Handling Hearing Safety Turn the phone on and off Press and hold the red button Confirm with Yes to power off. on the phone to turn it on/off. If the SIM card is valid but protected with a PIN code (Personal Identification Number), PIN is displayed. • upper left corner of Enter the PIN code and press OK ( keypad).
English Change the language, time and date The default language is determined by the SIM card. See General, p.23 on how to change language, time and date. Phone indicators Lights on the phone will: • • Flash green when you have a new message or a missed call. After reading the new message/missed call, the flashing will stop. Flash red when the battery is running low and during charging.
English • Press Menu Phonebook -New contact- Add. To perform the example on your Doro PhoneEasy 622 you should do the following: ® 1. 2. Press Menu, scroll to Phonebook and press OK. Select -New contact- and press Add. Entering text Entering text manually Select character • Press a numerical key repeatedly until the desired character is shown. Wait a few seconds before entering the next character. Special characters 1. Press * for a list of special characters. 2.
English 3. Press Select and continue with the next word. Alternatively, press 0 to continue with the next word. If none of the suggested words are correct, use manual input mode. Input mode Press # to change input mode. The icon on the top left of the display indicates the input mode.
English Display status symbols Signal strength No network coverage Ring only 5 Unread message in Inbox Ring + vibration Alarm active Vibration only Battery level Silent Call divert activated Bluetooth on, visible to others Bluetooth on, invisible to others Roaming (in other network) Missed call Headset connected Bluetooth connected Voice mail message received Display main symbols Mute Charger connected Message sending success Charger removed Message sending failed Headset in Error Head
English Searching Missed call. Press Read to see the missed calls. Emergency call Call on-hold vCard message SOS calls only Volume control Processing, please wait Call functions Make a call 1. 2. 3. Enter the phone number including the area code. Delete with Clear. to dial. Press Abort to cancel dialling. Press to end the call. Press Tip: For international calls, always use + before the country code for best operation. Press * twice for the international prefix +. Call from the phonebook 1. 2.
English Tip: Press and hold +/– to temporarily switch off the ringsignal without opening the flip. Volume control Use the side buttons +/– to adjust the sound volume during a call. The volume level is indicated on the display. If you use a hearing aid or have hearing difficulties when using the telephone in a noisy environment, you can customise the phone's audio settings, see Audio setup , p.27. Hearing aid compatible This telephone is hearing aid compatible.
English example, placing the receiver slightly below or in front of the ear may result in better performance. See also Audio setup , p.27 on how you can customise the telephones audio settings. Call options During a call the selection buttons1 ( functions. ) give access to additional Options (left selection button) • • • • • • Hold single call/Retrieve single to hold/retrieve the current call. End single call to end the current call (same as ). New call to call another number (Conference).
English Tip: Call waiting must be activated, see Call setup, p.34. Call information During a call, the outgoing or incoming phone number and the elapsed call time is displayed. If the identity of the caller is withheld, Unknown is displayed. Speed dial Use A–B, 0 and 2–9 to speed dial an entry from standby. • Press and hold the corresponding key. See Speed dial , p.32.
English Assistance button IMPORTANT! Always inform recipients in the Number list that they are listed as your assistance contacts. CAUTION When an assistance call is activated the phone is pre-set to handsfree/speakerphone mode. Do not hold the device near your ear when the handsfree mode is in use, because the volume may be extremely loud. The assistance button allows easy access to contact your predefined help numbers (Number list) should you need help.
English Note! Some private security companies can accept automatic calls from their clients. Always contact the security company before using their phone number. IMPORTANT! Information to the receiver of an assistance call, when Confirm with "0" is activated: • • • • After receiving the assistance message, each number in the Number list will be called sequentially. To confirm the assistance call, the receiver needs to press 0.
English 5. Press Save. Tip: For international calls, always use + before the country code for best operation. Press * twice for the international prefix +. Create ICE contact (In Case of Emergency) With additional information and medical information, first responders can access information from the victim's phone in case of emergency. In the event of a trauma, it is critical to have this information as early as possible which can increase the chances of survival.
English • • • • • Copy all From SIM to copy all phonebook contacts from the SIM card to the phone memory. Press Yes to confirm or No to abort. Copy all From phone to copy all phonebook entries from the phone memory to the SIM card. Press Yes to confirm or No to abort. Send vCard Send by SMS to send the selected phonebook contact as a vCard via text message. Enter the phone number of the recipient.
English 1. 2. 3. Press Use Press text ID • • • • • • • Menu ICE. / to scroll the list of entries. Edit to add or edit information in each entry, see Entering , p. 5 . Delete with Clear. Name: enter your name. Birth: enter your date of birth. Height: enter your height. Weight: enter your weight. Address enter your home address. Language: enter your preferred language. Insurance: enter your insurance provider and policy number.
English Create and send text message (SMS) Note! Before you can send any text messages, you need to save your message centre number. The number to your service centre is supplied by your service provider and is usually set on the SIM card. If not, you can enter the number yourself. See SMS centre, p.36. 1. 2. 3. 4. 5. 6. Press shortcut button . Messages. Alternatively press Menu Select Create new SMS. , p. 5 , then press To. Write your message, see Entering text Select a recipient from Phonebook.
English • • 5. 6. 7. 8. My pictures to select a file. The picture size must be less than 600kB. Take picture to use the camera to take a picture. You can also Add sound and Add video using the Options menu. Select Add subject and enter your subject, then press Done. Select To and select recipient from Phonebook. Alternatively, select Enter number to add recipient manually and press Done. Press Add to add more recipients. Press Send to send.
English 2. 3. 4. Select Inbox, Outbox or Sent. Select a message and press Read. Use Press Options: • • • • • • • • • • • • • • • 5. / to scroll up/down. View (MMS only) to view the message. Call to call the contact. Resend to send again to the same receiver. Reply to write your reply, then press Send. The message is sent immediately. Delete to delete. Press Yes to delete or No to return. Download/Cancel download. If the message is not downloaded yet, press Download.
English Received call Dialled call Missed call 3. Press Options: • • • • 4. 5. View to show details for the selected call. Delete to delete the call. Delete all to delete all calls in the call log. Save to save the number in the phonebook. Press OK to confirm. Press to dial. Camera You can take videos using the photos, record videos and view your photos and Camera menu. Camera (take photos) To get sharp photos, wipe the lens clean with a dry cloth. 1. 2. 3. .
English Camera adjustments • • / to zoom in and out. Use Use the side buttons +/– to adjust EV/Light sensitivity. Note! Zoom may reduce picture quality. For more camera settings, see Camera, p.40. Video camera To get sharp videos, wipe the lens clean with a dry cloth. 1. 2. 3. 4. Press Menu Camera Video camera. to start recording. Press Press to stop recording. Select Yes to save. Press Options: • • • Play Send by MMS to send as picture message. See Send Create and send picture message (MMS), p.17.
English • • • View for single view. Press Back to return. Use / to play and stop the video (video only). Send Send by MMS to send as picture message. See Create and send picture message (MMS), p.17. Send Send by Bluetooth to send to a Bluetooth device, see Bluetooth , p.43. Delete to delete. Press Yes to confirm or No to return. Use (picture only) Wallpaper to save as display background. Use (picture only) Phonebook picture to save as phonebook contact.
English Drag and drop content between phone and a computer 1. 2. 3. Connect your phone to a computer using a USB cable. Wait until the phone/memory card appears as external disks in the file explorer. Drag and drop selected files between the phone and the computer. Note! When the phone/memory card is connected to the computer, the phone cannot access the memory card. Some functionality and applications in the phone, such as the camera, may not be accessible.
English 2. Select Set format: • • 3. 12 hours/24 hours. Select Time format Select Date format and select the desired date format. Press OK to confirm. Set auto time To set the phone to automatically update the time and date according to the current time zone, select On. Automatic update of date and time does not change the time you have set for the alarm clock or the calendar. They are in local time. Updating may cause some alarms you have set to expire depending on network support and subscription.
English another network, provided your network operator has an agreement that allows you to do so. This is called roaming. Contact your service provider for more information. 1. 2. Press Menu Settings General Network setup. Select one of the following options and press OK to confirm: Select network • • • New search to perform new search if connection is lost. Select network to view available network, a list of available network operators is displayed (after a short delay). Select desired operator.
English 1. 2. Press Menu Select Torch: • • • 3. Settings General. 1 min to turn off automatically after 1 min. 2 min to turn off automatically after 2 min. No limit to turn of manually. Press OK to confirm. Note! The torch will drain the battery very quickly. Remember to turn off the torch after use. Phonebook storage 1. 2. Settings Press Menu Select Phonebook storage: • • 3. General. SIM to save 1 phone number per contact.
English Audio setup If you use a hearing aid or have hearing difficulties when using the telephone in a noisy environment, you can customise the phones audio settings. 1. 2. Press Menu Settings Select Audio setup: • • • • 3. Sound. Normal for normal hearing in normal conditions. Medium for mild hearing impairment or use in a noisy environment. High for moderate hearing impairment or use in a very noisy environment. HAC mode for use with hearing aid in the T position. Press OK to confirm.
English Alert type Incoming calls can be signalled by a ringtone and/or vibration. 1. 2. Press Menu Settings Select Alert type: • • • • • 3. Sound. Ring only for ringtone only. Vib. only for vibration only. Vib. and ring for vibration and ringtone. Vib. then ring to start with vibration and adds ringtone after a short while. Silent for no sound or vibration, the display light is lit. Press OK to confirm.
English 1. 2. 3. Press Menu Settings Display. Select Text size Normal/Large. Press OK to confirm. Idle display In standby mode the display can show clock only, clock and the service provider, or all information. 1. 2. 3. Press Menu Settings Display. Select Idle display Clock only/Clock & Operator/All info. Press OK to confirm. Themes You can select different themes to personalise the phones texts and background. 1. 2. 3. Press Menu Settings Display / to select a theme. Use Press OK to confirm.
English Note! You need to have Internet access to use most of the features in Doro Experience®. Depending on how you use your phone, it can use up a lot of Internet bandwidth really quickly. Before you use your phone, we strongly recommend that you contact your mobile operator about data rates. Using data services while roaming will be costly. Check with your mobile operator for data roaming rates before you use data roaming. Create account 1. 2. 3. 4. Settings Doro Experience Create account.
English • 3. More info to view more information. Press OK to confirm. Sync. intervals You can select different synchronisation intervals. 1. 2. Press Menu Settings Select Sync. intervals: • • • • 3. Doro Experience. Manual to synchronise manually. No automatic synchronising. Every 15 minutes to synchronise automatically every 15 minutes. Hourly to synchronise automatically every hour. Daily to synchronise automatically every day. Press OK to confirm.
English more information and for the voice mail number, contact your service provider. 1. 2. 3. 4. Press Menu Settings Calls Voice mail. Select Empty Add. Select Phonebook to add a contact from the Phonebook. Alternatively, select Manual. See Phonebook, p.13. Press OK to confirm. To edit or delete an existing entry, select it and press Options Edit/Delete. Call 1. 2. 3. voice Press Press Press mail Settings Calls Menu Options Call voice mail. OK to confirm. Voice mail.
English Top 10 Set an entry as one of the first 1. 2. 3. 4. 10 contacts listed in the phonebook. Settings Calls Top 10. Press Menu Select one of the empty entries and press Add. / to scroll through the phonebook, or quick search by Use pressing the key corresponding to the first letter of the entry. Press OK to save the selected entry, or press Back to discard changes. To delete a top 10 entry, select the entry in the top 10 list and press Delete.
English Signal LED 1. 2. 3. Settings Calls Signal LED. Press Menu Select On to enable notification light when incoming call and new message. Press OK to confirm. Call setup This menu may vary depending on network support and subscription. Contact your service provider for more information. Caller ID Display or hide your phone number on the recipient's phone when you call. 1. 2. Press Menu Settings Select Caller ID: • • • 3. Calls Call setup. Set by network to use default setting by the network.
English 1. 2. Press Menu Settings Select Call divert: • • • • • 3. Calls Call setup. Voice calls to divert all voice calls. Unreachable to divert incoming calls if the phone is turned off or out of range. No reply to divert incoming calls if unanswered. If busy to divert incoming calls if the line is busy. Cancel diverts no call divert. Press OK to confirm. Call barring Your phone can be restricted to disallow certain types of calls. Note! A password is needed to apply Call barring.
English 2. 3. Select On to enable Predictive text/eZiType , see Entering text , p. 5 . Press OK to confirm. ™ Writing language 1. 2. 3. Settings Messages Press Menu / to select a language. Use Press OK to confirm. Writing language. Write speed You can change the speed at which keypad characters repeat (before the cursor moves onto the next character). 1. 2. 3. Press Menu Settings Messages Select Slow, Normal or Fast. Press OK to confirm. Write speed. SMS settings Memory status 1.
English 2. 3. 4. Select SMS centre Edit. Enter the service centre number. Press Clear to delete. Press OK to confirm. Cell broadcast You can receive messages on various topics from your service provider, such as weather or traffic conditions in a particular region. For available channels and relevant channel settings, contact your service provider. Cell broadcast messages cannot be received when the device is roaming. 1. 2. Press Menu Settings Select Cell broadcast: • • • • 3. Messages SMS settings.
English Note! Make sure to insert a compatible memory card before saving on it (see Install the SIM card, memory card and the battery, p. 1 ). 1. 2. Press Menu Settings Select Storage: • • 3. Messages MMS settings. Phone to store in the phone memory. Memory card (memory card only appears if you have inserted a card) to store picture messages on the memory card. Press OK to confirm. MMS profile These settings are needed to use the picture messages function.
English 3. 4. 5. 6. Press OK to confirm. Press Yes to save or No to exit without saving. Select your new profile and press Options Activate. Press OK to confirm. You can also activate/modify an MMS profile by selecting one existing Activate/Edit/Delete. and press Options Note! Some service providers require you to send a picture message before you will be able to receive one. Send a picture message with text only to activate the service.
English Delivery report You can select if you want the phone to notify you when your text message or picture message has reached the receiver. 1. 2. 3. Press Menu Settings Messages. Select Delivery report On/Off to enable/disable. Press OK to confirm. Note! If you choose Delivery report=On, some operators will charge you for that message. Delete 1. 2. Settings Messages. Press Menu Select Inbox/Outbox/Sent/Delete all Yes to delete all messages. Camera 1. Press Menu • • • • • • • • • • 2.
English Assistance Change settings for the assistance button function. Activation Select how to activate the assistance function using the assistance button. 1. 2. Press Menu Settings Select Activation: • • • 3. Assistance. On Normal to activate by pressing and holding the button for approximately 3 seconds, or press it twice within 1 second. On (3) to activate by pressing the button 3 times within 1 second. Off to disable the assistance button. Press OK to confirm.
English • 3. Off the phone dials without sending a text message first. Press OK to confirm. Message 1. Press Menu Settings Assistance SMS. 2. Select Message Edit to write the message. 3. Press OK to confirm. Note! You must write a message if you activate the SMS function. Confirm with "0" When the assistance function is activated the phone dials the first number on the list. If the call is not answered within 25 seconds, the next number is dialled.
English • 2. Be careful about including numbers with automatic answering in the call list, as the alarm sequence stops once the call is answered. Press Back to return. Note! This information is not applicable if Confirm with "0" is set to On. Connectivity Bluetooth® IMPORTANT! When you are not using Bluetooth connectivity, select Function on/off/Off or Visibility/Off. Do not pair with an unknown device. Function on/off Settings 1. Press Menu 2. Select Function on/off 3. Press OK to confirm.
English 1. 2. 3. Press Menu Settings Connectivity Bluetooth Search device. Select from the list of devices and press Bond to connect. When connecting to another Bluetooth device you need a shared password. Enter the password and press OK. My device Add new devices or view saved. 1. 2. Settings Connectivity Bluetooth Press Menu device. Select device from the list and press Options: • • • • • 3. Connect/Disconnect to connect/disconnect with the selected device.
English • • • • • • • • • 4. 5. Account name to enter the account name. APN to enter the APN address. User name to enter user name. Password to enter password Connection type select HTTP/WAP. Proxy address to enter proxy address. Proxy port to enter proxy port. User name to enter user name. Password to enter password. Press Done, and press Yes to save or No to return. Select your new profile and press Options Activate.
English • • • 3. On to activate PIN code, you need to enter the PIN code every time the phone is started. Off to deactivate PIN code. Warning, if SIM card is lost/stolen it is unprotected. Automatic to not enter the PIN code when the phone is started, the phone remembers it automatically. If the SIM card is moved to another phone (lost/stolen), the PIN code needs to be entered to unlock. Press OK to confirm. Note! You need to enter the current PIN code to disable/enable SIM lock. Phone lock 1. 2. 3.
English 2. 3. 4. 5. 6. Select Number list Empty Add. Select Phonebook to add a contact from it. Alternatively, press Manual. . Press Enter the number and press OK to confirm. Repeat until you have 5 contacts (maximum). To edit or delete an existing entry, select it and press Options View/Edit/Delete. Fixed dial (FDN) You can limit calls to certain numbers saved on the SIM card. The list of allowed numbers is protected by your PIN2-code. 1. 2. Press Menu Settings Select Fixed dial: • • 3. Security.
English 2. 3. Select Reset settings to reset the phone settings. All the changes that you have made to the phone settings will be reset to default settings. Enter the phone password and press OK to reset. Reset all 1. 2. 3. Settings Security. Press Menu Select Reset all to delete phone settings and content such as contacts, number lists and messages (SIM memory is not affected). Enter the phone password and press OK to reset. Note! The default phone code is 1234.
English • 5. Copy/Move Phone/Memory card Options Open. Select a folder, eg Photos and press Options Paste. Press OK to confirm. Supported formats: • • • Picture format: BMP/GIF/JPG/PNG. Photos taken with the built in camera are saved as JPG. Audio format: WAV/AMR/MIDI/MP3/AAC/AAC+. Recordings made with the built in sound recorder are saved as AMR. Video format: MP4/3GPP. Additional functions Organizer Organizer menu contains: The Alarm Daily reminder Calendar Notes Alarm 1. 2. 3. 4.
English Calendar View Organizer Calendar. 1. Press Menu 2. Press Options View to show tasks for the selected date. 3. Press OK to confirm. Add task 1. Press 2. Enter 3. Enter 4. Enter 5. Press Organizer Calendar Menu . date for the task, then press . time for the task, then press subject. OK to confirm. Jump to date 1. Press Menu Organizer 2. Enter the date. 3. Press OK to confirm. Calendar Add task. Jump to date. View all Organizer Calendar. 1. Press Menu 2. Select a task and press Options View all.
English Note! The reminder will work even when the phone is switched off. Do not press Yes to power on if wireless phone use is prohibited or when it may cause interference or danger. When the alarm goes off a signal will sound. Press Stop to turn off the alarm or press Snooze to repeat the alarm after 9 minutes. Options 1. Press Menu Organizer Daily reminder. 2. Select a reminder, then press Options • • • • • • 3. Skip reminder to skip reminder. Activate reminder to activate reminder.
English More More menu contains: The FM radio Games Calculator Torch FM radio The FM radio has a frequency range from 87.5 to 108.0 MHz and 9 preset channels. Turning the radio on 1. 2. 3. Connect the headset to the headset socket . More FM radio. The radio is turned on. The Press Menu tuned frequency is displayed. or . Use the side keys +/- to adjust Select channel using the volume. Tip: Press to return to standby mode. The radio will continue to play. Volume More FM radio. 1.
English 2. 3. 4. Press Options Loudspeaker On. Use the side buttons +/– to adjust the sound volume. To turn off, select Off. Channel list (editing the channel list) 1. Press Menu More FM radio Options Channel list. 2. Select the channel you wish to edit and press Options: • • • 3. Play to play the selected channel. Delete to delete the channel. Press Yes to confirm or No to return to the channel list. Edit to edit the channel name, then press to edit the frequency, use # to enter the decimal point.
English 5. Repeat steps 2–4 as necessary. Select = and press OK to calculate the result. Torch 1. 2. More Press Menu Press Off to turn off. Torch. Note! See Torch, p.25 to set the automatic switch off time. Games 1. 2. More Press Menu Select Tetris/Boxman: • • • • • • • • 3. Games. Continue to continue game. Restart level to restart game at the same level as before. Start game to start a new game. Game level to select difficulty level. Best grades to view your best results.
English 1. 2. Press Menu Weather. Press Back to return to standby mode. Note! In order to see the weather, you must first select a city. See Weather, p.31 Instructions for the REMOTE USER Send remote control commands by text message 1. Make sure activation is set to On and that the remote user is saved in the Number list on the Doro PhoneEasy 622. Press Menu Settings Security Remote config. ® 2.
English Jeff Jackson 0700393939 0462805011 0462805083 Note! Only use numerals for parameters 2, 3 and 4. If you use letters in these parameters it will be stored as empty/blank in the phonebook. Contacts already saved in the phonebook, will not be replaced. They will be duplicated. This is to avoid unintentional removal of contacts from the phonebook. Tip: When storing international numbers, always use + before the country code for best operation. Enter the phone number including the area code.
English Example: Activate the assistance function. • *#alert#a#1# Example: Store Jeff Jackson in Number list as position one (1) with phone number: 0700-393939. • *#alert#n#1#Jeff Jackson#0700393939# Example: Enable the text message function to when the Assistance button is pressed. The text message should be: This is an assistance message. Please take appropriate actions. • *#alert#m#1#This is an assistance message. Please take appropriate actions.# Example: Enable the Confirm with "0" function.
English Add task to calendar Command P1 P2 P3 task yyyymmdd Date hhmm Time note description of task. max. length = 35 Example: Send a new calendar task to Doro PhoneEasy 622. The task text should be: dentist appointment in December 1, 2010 at 10:30.
English Troubleshooting Phone cannot be switched on Battery charge low Battery incorrectly installed Connect the power adapter and charge the battery for 3 hours. Full battery capacity is reached after the battery has been charged 3–4 times. Check the installation of the battery. Failure to charge the battery Battery or charger Check the battery and charger. damaged Battery should only be Improve the charging environment.
English SIM card error SIM card damaged SIM card incorrectly installed SIM card dirty or damp Check the condition of the SIM card. If it is damaged, contact your service provider. Check the installation of the SIM card. Remove the card and reinstall it. Wipe the contact surfaces of the SIM card with a clean cloth. Failure to connect to network SIM card invalid No coverage of GSM service Contact your service provider. Contact your service provider.
English Safety instructions CAUTION The unit and the accessories can contain small parts. Keep all of the equipment out of the reach of small children. The mains adapter is the disconnect device between the product and mains power. The mains socket outlet must be close to the equipment and easily accessible. Network services and costs Your device is approved for use on the WCDMA 900/2100 MHz, GSM 900/1800/1900 MHz networks. To use the device, you need a subscription with a service provider.
English pacemaker to avoid potential interference with the pacemaker. Persons with pacemakers: • • • Should always keep the phone more than 15 cm from their pacemaker when the phone is turned on. Should not carry the phone in a breast pocket. Should use the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn the phone off immediately.
English WARNING Excessive exposure to loud sounds can cause hearing damage. Exposure to loud sounds while driving may distract your attention and cause an accident. Listen to a headset at a moderate level, and do not hold the device near your ear when the loudspeaker is in use.
English Care and maintenance Your unit is a technically advanced product and should be treated with the greatest care. Negligence may void the warranty. • • • • • • • Protect the unit from moisture. Rain/snowfall, moisture and all types of liquid can contain substances that corrode the electronic circuits. If the unit gets wet, you should remove the battery and allow the unit to dry completely before you replace it. Do not use or keep the unit in dusty, dirty environments.
English Weight: 104 g (including battery) Battery: 3.7 V / 800 mAh Li-ion battery Bluetooth is a registered trademark of Bluetooth SIG, inc. ® eZiType is a trademark of Zi Corporation. ™ vCard is a trademark of the Internet Mail Consortium. Hearing aid This device should work with most hearing aid equipment in the market. However, full compatibility with all equipment can not be promised.
PhoneEasy 622 (1031) LAST PAGE English Version 1.1 © 2013 Doro AB. All rights reserved. www.doro.
