Operation Manual

English

Note! You must write a message if you activate the SMS function.

Position SMS

This function sends a text message with the users position to the recipi-

ents in Number list when an assistance call occurs. The message con-

tains date, time, and the positioning information of the Doro user. The

message is not editable. If no position can be found the message con-

tains the latest known position.

The positioning message is sent after the editable assistance message,

but before the assistance call sequence starts.

Activation

1. Press Menu Settings Assistance Position SMS .

2. Select On to enable, or Off to disable.

3. Press OK to confirm.

Assistance settings

Confirm with "0"

You can activate the Confirm with "0" function. This is especially recom-

mended if there is a risk that the assistance call is answered by a voice

mail or answering service. If the recipient doesn’t press

within 60 sec-

onds the call will be disconnected and the next number in the sequence

will be called. If the recipient presses

within 60 seconds, the call is

confirmed and no further call attempts will be made (assistance se-

quence interrupted).

1. Press Menu

Settings Assistance Confirm with "0".

2. Select On to enable, or Off to disable.

3. Press OK to confirm.

Signal type

Select the notification signal type for the assistance sequence.

1. Press Menu

Settings Assistance Signal type:

• High to use loud signals (default).

• Low to use one low signal.

• Silent no sound indication, like a normal call.

2. Press OK to confirm.