User manual

English
1. Press Menu Settings Network & Internet Hotspot & tethering.
2. Set the Bluetooth tethering switch to on to enable Internet sharing via a Bluetooth
connection.
Note! You must first establish the Bluetooth connection. See Bluetooth
®
, p.25.
Wi-Fi hotspot
Share your phone’s Internet connection via Wi-Fi. If you want to change any setting, please do so
before you turn on the feature.
IMPORTANT!
Always have the security turned on when your Wi-Fi hotspot is active to prevent unauthorized
use of your internet connection. Turn off the Wi-Fi hotspot feature when you no longer need to
share Internet access for other devices. When the feature is activated it will drain your phone's
battery significantly.
1. Press Menu Settings Network & Internet Hotspot & tethering Wi-Fi
hotspot.
2. Set the switch to on to enable Internet sharing via Wi-Fi.
3. Press Keep Wi-Fi hotspot on to set if the Wi-Fi hotspot should automatically turn off after
being idle for the set period of time:
• Always to have the Wi-Fi hotspot enabled until you manually turn it off.
• Turn off when idle for 5 min to automatically turn off after 5 minutes, if idle.
• Turn off when idle for 10 min to automatically turn off after 10minutes, if idle.
4. Press Set up Wi-Fi hotspot to set the configuration for the Wi-Fi hotspot:
• Network name to set the network name that will be shown to other devices. This is also
called the SSID.
• Security to set the security type (always use WPA2 PSK if the connecting device supports
it).
• Password: a password is used to prevent unauthorized access to your mobile network.
This option is available only when the security type is WPA2(AES).
Note! Check Show password to see it in clear text.
• Press Save to confirm any changes.
5. Press WPS connect to connect to your phone using WPS:
• Push button: First select this mode and the try to connect with the other device using
WPS.
• PIN from client: Enter the given PIN code on the other device using WPS. The setup can
take up to two minutes to complete.
Press Connect to initiate WPS connection.
6. Below you can see connected and blocked devices.
Reset Wi-Fi, mobile & Bluetooth
Here you can reset all network settings, including Wi-Fi, mobile data and Bluetooth settings.
1. Press Menu Settings Network & Internet Reset Wi-Fi, mobile & Bluetooth.
2. Press Reset settings.
3. Press Reset settings to confirm the reset.
24