Operation Manual

English
Install the application on the helper’s device
1. Go to
Play Store or App Store.
2. Install the
Connect & Care helper application to the helper's
device.
Note! You can also use this method to update your Connect and Care
app to the latest version.
Connect a helper to the Doro 8031
The request can be sent from either the 8030 user’s or the helper’s
device.
Send a connection request
1. From the
Connect & Care, open Contacts (available through
the menu key
if not visible on screen).
2. Tap Add Contacts and select the contact from the contact list on
your phone.
3. Once the request has been sent from either you or a helper, it needs
to be accepted by the other person.
Accept/Decline a connection request
1. From the
Connect & Care, open Contacts (available through
the menu key
if not visible on screen).
2. Tap the pending invitation to connect. (Tapping the menu key
is
equivalent to immediately accept the invitation.
3. Accept or Decline the contact request.
4. After accepting a contact request, select to share information with
the contact or not (this option is only available on the Doro 8030
and only if a Care service subscription exists).
5. When done, tap
.
Note! Even when the Doro 8031 user selects to share information with a
helper, only the information available within the Connect & Care
application is shared. Through the remote setup interface the current
value for some settings can also be shared, but personal information on
the Doro 8031, that is not stored inside the Connect & Care application,
is still personal.
60