doro 870
English 1 2 3 4 1 2 3 4 9 8 7 5 6 Scroll button Left menu button/OK Line/Speaker button Flash 5 6 7 and ringer off/on and key lock Disconnect and Off/On * # 8 9 Right menu key/ Delete/Redial Headset connector
English Connection..............................1 The display..............................2 Base unit indicator..................2 Battery......................................3 Coverage.................................3 Making a call............................3 Receiving a call.......................3 Volume control........................3 Turning the handset Off/On...3 Redialling.................................3 Mute button..............................3 Temporary silent mode..........4 Key lock.....
English The display Indicator 6 Function Shown within range of the base unit. Flashes when out of range. INT Internal call. Ring signal turned off with the * key. q Handset is connected (during calls). Message indication*. * Caller ID/New SMS received*. Alarm activated. Battery charge indicator. INT 1 Handset number (when using more than one handset). Base 1 The handset is connected to base unit 1. Press 19 Key lock activated. Function description for the key shown below the text, e.g.
English Battery Because batteries only have a certain lifespan it is quite normal that call time and standby time will decrease somewhat compared to the specifications when the telephone is used regularly. Fully-charged batteries (10 hours charging) will last for approx. 120 hours standby time or approx. 10 hours call time. These operation times apply at normal room temperature. Full battery capacity will not be reached until the batteries have been charged 4-5 times.
English Temporary silent mode When receiving an incoming call, you can press Silent to turn off the handset ring signal. Key lock Lock the keypad by pressing # until Press 19 is displayed. Unlock keypad by pressing 19. The keypad will be unlocked if the handset is placed in the base unit. Speaker/Group listening The handset can be placed on the table, leaving your hands free.
English Dialling from the phonebook 1. Press b . 2. Scroll among the entries. It is also possible to make a quick search in the phonebook by pressing the equivalent numeral button for the first letter one or more times. 3. Press O , and the number will be dialled. Changing telephone numbers/names 1. Press b . Scroll to desired entry. Press Option. 2. Scroll to Edit Entry. Press OK. < Artwork drawing for Doro 870 > 3. Edit the name/number. Press OK. Deleting entries 1. Press b . Scroll to desired entry.
English Incoming numbers (caller ID) The display shows you who is calling and the 50 most recent incoming numbers. New SMS message/Caller ID is indicated by * in standby mode. If the same number calls in more than once it will be saved as only one entry. Please note! This function requires a subscription from your service provider. Retrieving and dialling incoming numbers 1. Press *. Scroll to Caller list. The number of new calls is displayed. Press OK. 2. Select New Calls or All Calls.
English SMS messages This feature requires a current Caller Id subscription to be in place and only applies to text message users (SMS). Please remember individual SMS features are country dependent and will vary or be unavailable. Further details regarding the SMS text message service are available from you local network provider. Maximum 160 signs per message. The memory can store up to 30 messages. New SMS message/Caller ID is indicated by * in standby mode.
English Read new SMS/inbox 1. Press *. Scroll to SMS. Press OK. 2. Scroll to Inbox. The display shows the number of messages. Press OK. 3. Scroll to selected entry. Press Read. Read your message. 4. Press Option. Scroll to the required selection: - Use (reply/forward) - Delete - Delete list - Copy to Phoneb 5. Press OK and follow the instructions in the display. Write new SMS message 1. Press *. Scroll to SMS. Press OK. 2. Scroll to Write Message. Press OK. 3.
English Network services Most usual operator/extra services can be accessed via the menu or with the menu buttons during a call. Some functions are pre-programmed but is not certain that all functions will work on delivery as this will depend on the country of installation/ operator. You can change the codes that are sent, see Other Settings. Please note! You may have to pay extra for some services, contact your service provider for more information.
English Other settings 1. 2. 3. 4. 5. Press Menu. Scroll to Setting. Press OK. Scroll to Handset Set. Press OK. Scroll to required function e.g. Language. Press OK. Scroll to required setting. Press OK. Auto Answer The handset answers incoming calls when it is lifted from the base unit. Select Base Only used in systems with more than one base unit. Language Language setting is explained in Connection. Country code See separate description for programming country codes.
English Country Code To copy entries from the SIM card using “+”, it is often necessary to enter certain information. Telephone numbers on the SIM card that have been stored with the international dialling code 00 followed by the country code will also be changed. Example of settings for UK: Country code (domestic): 44 International prefix: 00 National prefix: 0 Register Every new handset must be registered in order to use a base unit. Every base unit can manage up to 3 different handsets.
English System settings System PIN is 0000 on delivery. 1. Press Menu. Scroll to Setting. Press OK. 2. Scroll to Base Set. Press OK. 3. Scroll to desired function e.g. Access Code. Press OK. 4. Scroll to required setting. Press OK. Ring Priority You can decide whether all handsets should ring at once when there is an incoming call, or if one handset should start ringing before the others. You can set the number of ring signals for this function as well. Care dial The CARE memory is used to store e.g.
English Call barring The telephone can block certain types of outgoing calls. System PIN is 0000 on delivery. 1. Access Call Barring according to description on previous page. 2. Scroll to selected handset. Press OK. 3. Scroll to Barring Mode. Press OK. 4. Scroll to required setting. Press OK. INT call Only allows internal calls. Blocks all outgoing calls. Barred no. Blocks the numbers you select, see below. Setting barred numbers Enter the sequence of digits for the type of call to be barred.
English Expanded system (+1) All handsets included in the package are registered to the base unit already. The handset number used for internal calls is shown in the display on standby. The base unit should be positioned centrally so that the coverage area is roughly equal for all handsets. You can register up to 3 handsets to one base unit.
English Troubleshooting Check that the telephone cord is undamaged and properly plugged in. Disconnect any additional equipment that may be connected, e.g. extension cords and other phones. If the problem is resolved, the fault is with the other equipment. Test the equipment on a known working line (e.g. at a neighbour’s). If the product works then the fault is with your telephone line. Please inform your local telephone company.
English Australia and New Zealand Products permitted for connection to the telephone network are marked with in Australia and in New Zealand. These marks indicate the products comply with the regulations and can be used without concern in the country of purchase. If you believe this product is malfunctioning, please refer to the relevant section and/or consult the troubleshooting guide in this manual to ensure that you have followed the instructions carefully.
English REN (RN for New Zealand) The REN (Ringer Equivalence Number) or (RN) is of significance only if you wish to connect more than 1 telephone to your telephone line. A standard telephone line has a maximum REN capacity of 3 (RN of 5). It is possible to connect 3 devices with a REN of 1 (RN of 1) with no degradation to the product’s performance. Exceeding this limit may cause the volume of the ringer in any phone to decrease or not ring at all.
English Version 1.
