Doro Comfort 1010 English
1 2 3 4 11 10 9 5 6 8 7 1. 2. 3. 4. 5. 6. Up/Call log Left menu key/OK Call key Down/Redial Keypad lock Speaker 7. 8. 9. 10. 11.
English Contents Installation ...................................................................................... 1 Connection ................................................................................ 1 Basic setup ............................................................................... 1 Operation ........................................................................................ 2 Making a call .............................................................................
English Installation This device is intended for the analogue telephone network lines in AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IS, IT, LV, LT, LU, MT, NL, NO, PL, PT, RO, SI, SK, SE. Connection 1. 2. 3. 4. Connect the mains adapter to an electrical wall socket and to y on the base. Connect the telephone line cord to a network wall socket and to K on the base. Insert the batteries 2 x 1.2 V AAA 400 mAh NiMH into the handset in accordance with the markings.
English Operation Making a call 1. 2. Enter phone number. Delete with C. Press q to make the call. Press L to end the call. Receiving a call 1. 2. Press q to answer. Press L to end the call. Note! If auto answer is enabled, the call is answered when you pick up the handset from the base, see Handset settings (HS SETTINGS), p. 5 . Volume control The handset volume may be adjusted during a call with v /V . The volume level is indicated on the display.
English Keypad lock Press and hold * to activate/deactivate. When activated is displayed. Incoming calls can be answered by pressing q even if the keypad is locked. During the call, the keypad is unlocked. When the call is ended or rejected, the keypad is locked again. Paging Press J on the base unit to page the handset/s. The handset/s will ring and PAGING is displayed. The signal will stop automatically, or press J again, or press L on the handset.
English 2. 3. 4. 5. 6. Select contact with v /V . Press . Select EDIT. Press OK. Edit name. Delete with C. Press OK. Edit phone number. Delete with C. Press OK. Select MELODY. Press OK. Deleting contacts 1. 2. 3. 4. Press b . Select the contact you want to edit. Press Select DELETE. Press OK. OR select DELETE ALL. Press OK. Press OK to confirm. . Phonebook status (PB STATUS) Here you can check how many phonebook entries that are stored and available storage capacity.
English Note! As default the last 20 incoming answered and unanswered calls are stored along with the date and time of the calls. Caller ID messages The following messages will be displayed occasionally: OUT OF AREA Unknown number, e.g. international call. WITHHELD Information about the number is blocked. Number cannot be displayed. a Message indication from your network operator*. * Only functions in certain countries. To remove the message indicator: Press v and then press and hold 4.
English AUTO ANSWER The call is answered when the handset is lifted from the base. DATE & TIME Setting the date/time. The format of date/time can also be adjusted. Base settings (BS SETTINGS) 1. 2. 3. Press . Select BS SETTINGS. Press OK. Select function e.g. BS RINGER. Press OK. Enter desired setting. Press OK. DELETE HS To de-register a handset. FLASH TIME Recall time. LONG=New Zeeland. MEDIUM=France/Portugal. SHORT=others including UK/AUS. CHANGE PIN The code (default 0000) can be changed.
English Intercom / internal call 1. 2. Press . Enter call number 1-5 for the desired handset or press 9 for all. A tone will be heard if an external call comes in while an internal call is in progress. End the internal call with L and then answer the external call with q. Transferring calls/conference between handsets When an external call is connected; 1. 2. 3. Press . Select INTERCOM. Press OK. If using more than 2 handsets: Enter call number 1-5 for the desired handset or press 9 for all.
English other electrical equipment, this is to minimize the risk of any interference. It is normal for the device to become warm during charging and this is not dangerous. Range The telephone’s range depends on whether or not the radio waves carrying the call are restricted by obstacles in their path, and is usually between 50 and 300 metres. Coverage can be improved by turning one’s head so that the handset is aligned with the base unit.
English If the phone still does not work, please contact the place of purchase for service. Don’t forget the receipt or a copy of the invoice. Care and Maintenance CAUTION Only use batteries, mains adapter and accessories that have been approved for use with this particular model. Connecting other accessories may be dangerous and may invalidate the phone's type approval and guarantee. The mains adapter is the disconnect device between the product and mains power.
English This guarantee will not apply to a fault caused by an accident or a similar incident or damage, liquid ingress, negligence, abnormal usage, non-maintenance or any other circumstances on the user’s part. Furthermore, this guarantee will not apply to any fault caused by a thunderstorm or any other voltage fluctuations. As a matter of precaution, we recommend disconnecting the charger during a thunderstorm. Batteries are consumables and are not included in any guarantee.
Doro Comfort 1010 Doro Comfort 1010 duo Doro Comfort 1010 trio Doro Comfort 1010 quad LAST PAGE English Version 1.0 © 2011 Doro AB. All rights reserved. www.doro.
