User guide

English
18 www.doro.com
English
www.doro.com 19
Messages
Entering telephone numbers for SMS Service Centre/network
Check that the right number for your network has been programmed.
1. Press Menu.
2. Scroll using v/V to Message. Press OK.
3. Scroll using v/V to SMS. Press OK.
4. Scroll using v/V to Service Centre. Press OK.
5. Select either Send or Receive using v/V. Press OK.
6. Enter number, mistakes can be erased using Clear.
7. Press OK.
Please note!
In certain countries, the number for the service centre is saved using 1-2 extra gures following
the number itself. The rst gure added is the terminal number and the second (i.e. the last)
is the message type (0-9). Contact your network operator to nd out if the message type and
terminal number must be used or if these can be set to 00 or left out entirely.
First ring
The telephone can be programmed to ring only upon receiving the second ring
signal, this is ideal if receiving an incoming SMS message.
The factory setting is ON.
1. Press Menu.
2. Scroll using v/V to Message. Press OK.
3. Scroll using v/V to SMS. Press OK.
4. Scroll using v/V to Set First Ring. Press OK.
5. Select the required setting using v/V.
6. Press OK.