User guide

English
26 www.doro.com
English
www.doro.com 27
Handset Set
Registering an additional handset
To enable the use of more than one handset a registration has to be performed.
Every new additional handset must be registered in order to use the current base
unit, each base unit can handle up to 6 handsets.
On registration the handset is allocated a handset number for use on the new base
unit, the handset numbers are 1-6.
Please refer to the Expanded System chapter for more information.
1. On the Base unit press and hold
j
until the indicator light starts ashing.
Registration mode will remain active for one minute.
2. Press Menu.
3. Scroll using v/V to Handset Set. Press OK.
4. Scroll using v/V to Register. Press OK.
5. Select the base unit (1, 2, 3 or 4) you wish to register using v/V. Press OK.
6. Enter the current base unit PIN code (0000 at default). Press OK.
7. After a few seconds (no more than 90) all unused handset numbers are
displayed. Select one of these (usually the lowest displayed number) by pressing
the corresponding keypad button.
If you wish to de-register an additional handset please refer to page 32.
Handset PIN code
The PIN code is a four-digit number that you can select and protects against
unauthorised use of certain functions.
1. Press Menu.
2. Scroll using v/V to Handset Set. Press OK.
3. Scroll using v/V to Handset PIN. Press OK.
4. Enter the current PIN number (0000 at default).
5. Enter your new number.
6. Enter your new number again to conrm.
Reset handset defaults
Resetting will return most functions to the original manufacturer default settings.
Registrations are not affected.
1. Press Menu.
2. Scroll using v/V to Handset Set. Press OK.
3. Scroll using v/V to Default Set. Press OK.
4. Enter your current handset PIN code (0000 at default).
5. Press OK to conrm.