User's Manual

English
Set by network Use default setting by the network.
Hide ID
Never show your number.
Send ID
Always show your number.
Call waiting
You can handle more than one call at a time. An alert tone will be
heard if there is an incoming call while talking. To put the current
call on hold and answer the incoming call, press Options, select
Answer and then OK.
1. Press Menu, scroll to
and press OK.
2. Select Calls and press OK.
3. Select Call setup and press OK.
4. Select Call waiting and press OK.
5. Select one of the following options and press OK:
Activate Enables call waiting.
Deactivate Disables call waiting.
Query status Displays if call waiting is active or not.
Call divert
You can divert calls to an answering service, or to another phone
number. Set up which calls should be diverted. Select a condition
and press OK, then select Activate, Deactivate or Query status (see
Call waiting, p.28) for each.
1. Press Menu, scroll to
and press OK.
2. Select Calls and press OK.
3. Select Call setup and press OK.
4. Select Call divert and press OK.
5. Select one of the following options and press OK:
Voice calls Diverts all voice calls.
Unreachable
Diverts incoming calls if the phone is turned off or
out of range.
No reply
Diverts incoming calls if unanswered.
If busy Diverts incoming calls if the line is busy.
Cancel diverts Do not divert calls.
28