English Formula 3/5R
1 2 3 4 5 11 10 9 6 7 8 Formula 5r 14 Pantone White 13 Fomular_ Doro_ Artwork_ TAM/BUZZER_FOR 12
English 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Up / missed call Left menu button/OK Talk button Down/Redial Redial * and keypad lock # and ring signal On / Off Phone book R Recall button (PBX features) End call and on / off button Right menu button/Back/Internal call Only for Formula 5r: 12. Paging 13. Answer machine functions. Detailed in Answer machine section. 14.
English Installation This device is intended for the analogue telephone network lines in AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IS, IT, LV, LT, LU, MT, NL, NO, PL, PT, RO, SI, SK, SE. Connection 1. Connect mains adapter and phone cable to wall sockets. 2. Insert batteries (1.2V NiMH AAA Doro 500mAh) in accordance with the markings. 3. Place the handset into base unit with the keypad facing outwards to charge (24 hours the first time). 4. Press (left menu button). { 5.
English Battery When the batteries are relatively new (less than 6 months) and fully-charged (10 hours) they will last for approx 100 hours standby time or approx 10 hours call time. Full battery capacity will not be reached until the batteries have been charged 4–5 times. It is not possible to overcharge or damage the batteries by charging them for ”too long”. It may take up to 5 minutes charging before display illuminates, if batteries are totally empty.
English Range The telephone’s range depends on whether or not the radio waves carrying the call are restricted by obstacles in their path, and is usually between 50 and 300 metres. Coverage can be improved by turning one’s head so that the handset is aligned with the base unit. Sound quality declines as the limit is reached until the call is finally interrupted. The 6 symbol is shown when the phone is within range and goes out/flashes when it is out of range.
English Operation Making a call 1. Enter the required number. Delete if necessary with right menu button C. 2. Press q to make the call. Press L to end the call. Receiving a call 1. Wait for the handset to ring. 2. Press q to answer. Press L to end the call. Volume control The volume may be adjusted during a call with {/}. Redial Press r. Scroll among the 5 most recently dialled numbers with {/}. Press q. Mute button The microphone can be switched on / off during a call with C (right menu button).
English Phonebook You can save 20 numbers/names. If you subscribe to a caller ID service, the name allocated to the caller in the phonebook will be shown for incoming calls. It is possible to choose between various ringers for the numbers saved in the Phonebook (only functions if you subscribe to a caller ID service). Save name/number in handset Press b. Press . Scroll to ADD. Press OK. Press equivalent digit key several times for desired name. Press OK.
English Incoming numbers/Caller ID The display shows you who is calling and the 10 most recent missed calls. NEW CALLS will be shown in standby mode and in the list indicates a missed call. This function requires a subscription from your service provider! Retrieving and dialling 1. Press {. Scroll to the desired entry with }. 2. Press q to call or press for various options ( = back). Deleting new calls/number log 1. Scroll { to new call number, press (left menu button). 2.
English Settings Functions 1. Press . Scroll to HS SETTINGS. Press OK. 2. Scroll to desired function e.g. LANGUAGE. Press OK. 3. Scroll to desired setting. Press OK. ALARM When the alarm is activated will be shown in standby mode. When the alarm goes off, a signal will be heard for 45 seconds. The signal can be turned off with any button. If SNOOZE is activated the alarm will go off again approx. 7 minutes later. Turn the alarm off permanently via the menu or by holding L down for a few seconds.
English System settings System PIN is 0000 on delivery. 1. Press . Scroll to BS SETTINGS. Press OK. 2. Scroll to desired function. Press OK. 3. Enter the desired setting. Press OK. BS RINGER/ The base unit’s ringer signal can be adjusted. Only applies to Formula 5r. RING VOLUME DELETE HS FLASH TIME CHANGE PIN To de-register a handset. WARNING: A deregistered handset can no longer be used with the system! Recall time. LONG=New Zealand. MEDIUM=France/Portugal. SHORT=others incl. UK/AUS. The code (e.g.
English Register a new handset All handsets included in the package are already registered to the base unit. Only for separate handsets/service measures. You can register up to 5 handsets to one base unit. Note! This model is GAP (Generic Access Profile) compatible, which means that the handset and the base unit can both be used with most other GAP compatible units irrespective of manufacturer. However the GAP protocol cannot guarantee that all functions may be accessed.
English Outgoing message The outgoing message (max 3 min) is heard by incoming calls. There are two separate outgoing messages, one for Answer only (callers cannot leave a message) and one for normal answering function. Please also select desired answer function. See TAM Settings. Press . Scroll to ANS. MACHINE. Press OK. Scroll to TAM SETTINGS. Press OK. Scroll to OGM SETTINGS. Press OK. Scroll to ANSWER & REC/ANSWER ONLY. Press OK. Scroll to Record MESS. Press OK.
English Use of answer machine (handset) New messages are indicated by starts with new messages. 1. 2. 3. 4. flashing in the display in standby mode. Playback always Press . Scroll to ANS. MACHINE. Press OK. Scroll to MSG PLAYBACK. Press OK. During playback the following commands are available (see table below). End by pressing L. 2(X) Delete during playback 4 ( 88 ) Previous message 5( ) Stop 6 ( 99 ) Skip to next message }/{ Volume control Delete all old messages 1. Press . Scroll to ANS.
English Out of memory The memory has room for up to 59 messages (including the outgoing message) max. 15 minutes depending on the compression you set. When TAM FULL is shown or the base unit flashes FF, no new messages can be recorded until the old ones have been played back and deleted. In that case, the telephone answer machine responds with the outgoing message for Answer Only. Note! Remember to delete messages regularly! Answer machine settings 1. 2. 3. 4. Press . Scroll to ANS. MACHINE. Press OK.
English Remote activation The answer machine can be activated via the remote access functions. 1. 2. 3. 4. 5. Call the answer machine. It will answer after approximately 10 rings. Press * when the outgoing message is played. Enter the PIN code, see Answer machine Settings. One beep confirms correct code. Press 7. Replace the handset. Remote access The unit can be remotely accessed using an ordinary tone dialling telephone. 1. 2. 3. 4. 5. Call the answer machine.
English Troubleshooting Check that the telephone cord is undamaged and properly plugged in. Disconnect any additional equipment, extension cords and other phones. If the problem is resolved, the fault is with some other equipment. Test the equipment on a known working line (e.g. at a neighbour’s house). If the equipment works there the fault is probably with your telephone line. Please report this to your network operator.
English Warranty and other information Specific Absorption Rate (SAR) This device meets applicable international safety requirements for exposure to radio waves. The max. limit according to WHO is 2W/kg (per 10g tissue).This telephone measures 0,04 W/kg (per 10g tissue). Close to the base, i.e. within 20% of the maximum range, the SAR value is reduced to around 0,02 W/kg (per 10g tissue).
Doro Formula 3 Doro Formula 3 Duo Doro Formula 3 Trio Doro Formula 3 Quad Doro Formula 5r Doro Formula 5r Duo Doro Formula 5r Trio Doro Formula 5r Quad English Version 1.
