Operation Manual

User Manual - English
57
Call Completion
Action: Dial the number when called party extB becomes idle.
ip810c ip820c ip830c ip840c
The following message will be displayed when the called party extB becomes idle:
Call: extB?
Call: extB?
Cancel Ok
— Call Completion —
Call: extB?
Call Completion time
Call: extB
Press to dial the number.
Result: The call to the busy party extB could be completed.
On “No Responding” (CCNR)
You can activate call completion when the called party extB is not responding.
L Note: Be aware that activity detection only detects whether the phone you are
calling is being used. It cannot detect whether the person you want to reach is in
the room or not!
The following settings must have been provisioned in advance:
ip810c only:
 Setup  Function Keys  Px  Context: <Active>
 Setup  Function Keys  Px Type: <Key Event>
 Setup  Function Keys  Px Number: F_CALL_COMPLETION
Activate CC
Action: Activate call completion when called party extB is not responding
ip810c ip820c ip830c ip840c
extB
…
extB
CC Cancel
——— Calling ———
extB
… CC … …
Calling time
extB name
e
extB number
ext1 name
f
ext1 name
… CC … …
When the called party is not responding press:
LEDx Px
F_CALL_COMPLETION
CC
S3
CC
S2
CC
S2
Result: Call completion has been activated and the following message is displayed:
Waiting: extB
Waiting: extB
Cancel Ok
— Call Completion —
Waiting: extB
Call Completion time
Waiting: extB