Operation Manual

User Manual - English
14
(3) Manual Phone Initialization
If your IP telephony system does not support automatic initialization, use the following
instructions.
(3a) Manual DHCP Setup
If your phone cannot contact a DHCP Server for any reason, the message “Sending DHCP
Requests” is displayed permanently.
Action: Stop the phone from sending DHCP requests
ip810c ip820c ip830c ip840c
Sending DHCP Re
■■■■■■■■■_ _ _ _ _ _
Sending DHCP Request
■■■■■■■■■_ _ _ _ _ _
Sending DHCP Request

Sending DHCP Request

Press
Cancel
Result: Sending of DHCP requests will be stopped and you will be prompted:
No, the network does not use DHCP. Yes, the network uses DHCP.
L Note: Try to fix the problem which caused DCHP
failure and proceed.
Press
for not
using DHCP
Press
for using DHCP
Result: The phone will prompt you to enter the
network settings manually.
1 Warning: Using the wrong network parameters may
result in inaccessibility of your phone and may also
have an impact on your network performance! Please
ask your network administrator!
Result: The phone reboots and attempts again to
contact a DHCP server within your network to receive
valid network settings.
A
re you using
DHCP?